Power steering fluid?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Slo-Sho

It wasn't me!
Joined
Aug 11, 2001
Messages
1,825
Reaction score
21
Location
Crossroads, CNY
I was told by a mechanic that it was OK to use ATF in the power steering. Is this true? If so, what type would be acceptable for use...Type F, Dex III, etc?
 

38SHO

#1 Oil Abuser
Joined
Jan 16, 2005
Messages
2,763
Reaction score
288
Location
North Palm Beach
any

mercon V wouldn't be bad because it can take some more heat........
but its more

or any synthetic ATF.... but its also more....

I run just regular ATF mercon/Dexron 3...........
 

itwonder

SHO Member
Joined
Dec 17, 2005
Messages
1,909
Reaction score
556
Location
VA
I was told by a mechanic that it was OK to use ATF in the power steering. Is this true? If so, what type would be acceptable for use...Type F, Dex III, etc?

I choose to flush with cheap Walmart Dexron ATF, then fill with Valvoline Synpower PS fluid. But I think you will be fine with any quality name brand Dex/Merc 3 ATF like Todd says.
 
Last edited:

Devin

3.Slow
Supporting Member
Joined
Jan 15, 2003
Messages
3,542
Reaction score
932
Location
Pacific Northwest
AMSOil ATF. Took a little bit over a quart, dry, if I remember correctly in my 90.
 

Forum statistics

Threads
107,077
Messages
1,181,196
Members
16,142
Latest member
Kaevorlly

Members online

Back
Top