Gas Cable

[SHO_N_GO]

I have a 95MTX and my gas cable is streched and has some fraying can i use the cable from an ATX or Taurus/Sable

Thanks
Mike

 

[jthod]

yep, any should work. I believe all the way from 89-95, and maybe earlier?

 

[SHO_N_GO]

well i found this site and it says other wise is this true or not

http://www.trademotion.com/partloca...79&make=10&model=Taurus&year=1995&catalogid=1

 

[stensg]

go to the junk yard and pull one from a taurus measure it and then trough it in the trunk of the car so you know where it is after going home and mesuring yours and if its the same you go back stick it in you pocket and problem solved

 

[bottonic]

go to the junk yard and pull one from a taurus measure it and then trough it in the trunk of the car so you know where it is after going home and mesuring yours and if its the same you go back stick it in you pocket and problem solved

.....and I was recently wondering why there are so few pick n pulls left out there. Thanks for clearing that up.

P.S. - A regular Taurus cable will not work. Post an ad in the WTB section, and I bet within a few days you will have yourself a cable that fits

 

[SHO_N_GO]

go to the junk yard and pull one from a taurus measure it and then trough it in the trunk of the car so you know where it is after going home and mesuring yours and if its the same you go back stick it in you pocket and problem solved

Thanks for the advice but i don't do stuff like that anymore, beside's we have no Pick n Pull's around here, the J/Y have no SHO's and the closest one with a SHO is 100 miles away.