ant-live
New Member
Does anyone have any wheels wider than 17x8 on gen II? If so, what is the best way to trim the fenders?
Fender Trimming
- Thread starter ant-live
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
I've had 19x9 rims on my SHO before, well tried them on my SHO at my buds tuning shop, I never drive with them but they fit good with a 42mm offset and 245/35/19 tires.
It made my SHO look like a big-size toy but fit just as well as my 18's from lock-to-lock upfront no rubbing, since my rear is so tight it sat right in the same spot as it sits right now with my 18x8's, which is right on the thread, except it was bit closer out to the fender. IMO for daily driving you would need to at least roll the rear fenders, without an aggressive drop upfront or saggy springs there shouldnt be a problem with rubbing.
There another Gen II SHO on here with 17x9 Cobra rims his member name is jdh00 (#338), I have the pics on my HD but i'll host them if I cant find them again on the forum.
It made my SHO look like a big-size toy but fit just as well as my 18's from lock-to-lock upfront no rubbing, since my rear is so tight it sat right in the same spot as it sits right now with my 18x8's, which is right on the thread, except it was bit closer out to the fender. IMO for daily driving you would need to at least roll the rear fenders, without an aggressive drop upfront or saggy springs there shouldnt be a problem with rubbing.
There another Gen II SHO on here with 17x9 Cobra rims his member name is jdh00 (#338), I have the pics on my HD but i'll host them if I cant find them again on the forum.
ant-live
New Member
Let me know if you find them. I want to put some 17x8.5's and i know someone mentioned something about some spacers.
I couldnt find them so I just hosted them off my server:
There a bit out upfront but the rear looks good from the pics, I doubt you would need wheel spacers if 9" wont rub.
<small>[ November 06, 2002, 03:19 PM: Message edited by: RI-SHO ]</small>
There a bit out upfront but the rear looks good from the pics, I doubt you would need wheel spacers if 9" wont rub.
<small>[ November 06, 2002, 03:19 PM: Message edited by: RI-SHO ]</small>
ShoGuy93
Yes I Have Blue Rims
Looks good. i see he has the old famous clear corner modd too! thumbs_u
now everyone is catching on.shojuan
New Member
The way I used to trim fenders was to take some tin snips and cut about every inch or so on the lip. Then take a hammer and bend the lip up.
I think with my SHO when the time comes I'll just use my dremel and grind or cut it down. Back when I used the tin snip trick I didn't have a dremel. Just a nicer, more valuable car.
Rick
ant-live
New Member
I just received my dremel i bought of ebay and love it. What about offset? What is the range that would be good for the gen II?
