Door Locks-Keypad Question/Problem

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

JST4SHO1

SHOw Bronze#20
Joined
Jun 15, 2009
Messages
88
Reaction score
34
Location
SC
So when I bought this car the po had programed his birthday as the keyless code. This past friday I changed the code to my own, followed the instructions in the manual, found the factory code sticker underneath the trunk. Has been fine up till today, the code and my remote entry.
Just now coming from lunch I get out of the car and hit the remote button and everything locks, I forget somthing in the car go back and hit unlock on the remote and everything opens but the driver door? Had to reach in a open it from pass. side. Even from the in car controls the driver door does not lock or unlock, but everything else does. Anyone every experience this? Did the acuator just crap out on me?
 

ForcedSHO

Stupid SHO
Joined
Jun 17, 2009
Messages
111
Reaction score
55
Location
New Jersey
Most likely does it make an annoying noise in the drivers door when locking/unlocking? If yes then yes new actuator.
 

JST4SHO1

SHOw Bronze#20
Joined
Jun 15, 2009
Messages
88
Reaction score
34
Location
SC
nah it just sounds like you are locking and unlocking the doors. Nothing coming from drivers door thats new(sounding)
 

rubydist

SHO Master
Staff member
Super Moderators
Joined
Jun 25, 2007
Messages
7,521
Reaction score
3,399
Location
Denver
if the actuator didn't take a dump, then the linkage from the actuator to the lock has come off. either are possibilities.
 

Forum statistics

Threads
107,077
Messages
1,181,197
Members
16,142
Latest member
Kaevorlly

Members online

Back
Top