Are SHO engine codes and regular taurus codes the same?

[s.h.o.p.r.i.d.e]

Code 118?

Are SHO engine codes and regular taurus codes the same?

 

[SuperHO]

Should be

 

[s.h.o.p.r.i.d.e]

Also where is the code de-coder page?

 

[s.h.o.p.r.i.d.e]

have two codes here but i dont know what they mean.


114 - IAT sensor out of range

118 - ECT sensor is/was high or open
ECT indicated -40degF. Circuit open.

 

[Axianator]

Also where is the code de-coder page?

See this link for a summary listing of OBD-II DTCs for the Gen 3 SHO:

http://www.v8sho.com/SHO/DTCOBDIISAE J2012.html

have two codes here but i dont know what they mean.


114 - IAT sensor out of range

118 - ECT sensor is/was high or open
ECT indicated -40degF. Circuit open.

Both of these DTCs (P0114, P0118) indicate that a problem occured during testing and could point to a short-to-ground or other electrial problem within the two circuits.

Did you wait until the engine coolant was up to operating temperature before pulling these codes?

 

[SHOZ123]

Those two codes sound like a voltage problem to the sensors. Check to see if there is 5V on one of the wires going to each sensor when the key is on and engine off.