Search results

  1. Y

    Left rear brake sticking

    It's the rubber lines. are the lines the same front and rear for a 90 and 94 SHO. Jegs sells a kit for 94-95's braided for 90 bucks. I may go that route if they are the same. Autozone lists the same part numbers for both.
  2. Y

    Left rear brake sticking

    I replaced the caliper and unhooked the e-brake cable. The slider pins are good. I will check out the brake line tomorrow after work. Gotta drive the wifes Focus tomorrow. At least the air works in it.
  3. Y

    Left rear brake sticking

    What causes brake pressure to stay on the caliper. The brake sticks unless I crack the bleeder screw. I bled an entire bottle of new fluid through the caliper. After bleeding all the other wheels. So I'm sure there is no air in the system. Any guesses guys. It's not the master cylinder. I...
  4. Y

    Ball joint?

    replace the ball-joint pinch bolt also. They are supposed to be replaced everytime. I just broke mine with a ratchet and socket by hand.
  5. Y

    Boosted guys, little help?

    couldn't he use adjustable cam sprockets to reduce some of the over lap and still get the lift and duration he wants?
  6. Y

    cheapest delco wires - and hesitation issues

    try here. I think 32 bucks a set. http://www.discountautoparts.com/
  7. Y

    AC Delco plug wires

    Has anyone tried them. For 32 dollars I may give them a shot. The part number is 16-826Q.
  8. Y

    no power

    The blinker fluid is fine I just topped it up. It has good plugs and they are the right ones. I think I will just order some wires when I get the money and go from there.
  9. Y

    no power

    no oil in the wells. No codes. IT currently has no cats and has true duals. Could there not be enough back pressure. The wires look good but they are original it appears.
  10. Y

    Remote Turbo

    I've been thinking it can't be too hard to build a twin turbo setup with a couple of 2.3 mustang turbo's. Maybe in a couple of years.
  11. Y

    Tweecer ??'s

    Thank's. I am going to try and get that one. Is it going to be hard to tune?
  12. Y

    Tweecer ??'s

    Is there only one tweecer with different programming. Will this one work on my SHO. http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=7928062857&ssPageName=STRK:MEBI:IT
  13. Y

    twEECer newbie ?'s

    Can I use my home computer on one of these. I may buy it on the first if I don't need a laptop. Is it hard to program. I have a lincoln maf on the way and have true duals on it. I can download the file for the maf above but I'm used tp cars with pushrods, points, and carbs. Technically...
  14. Y

    no power

    My car has no power below 4000rpm's. You step on it and it just bogs. Any ideas. the Secondaries are closing.
  15. Y

    broken eibachs

    has anyone else had there springs break on them. When I got my car the rear ones were broken on the ends. I guess the softer part is breaking off. Anyone have a pair for the rear for sale. I put the stock ones back in for now.
  16. Y

    compression test results

    The throttle body was fully open. I let the engine crank about 5 or 6 times each cylinder.
  17. Y

    compression test results

    What pressure should I see for a dry compression test? I got: #1-165 #2-180 #3-180 #4-180 #5-170 #6-180 Are these good? The engine has 175k on it.
  18. Y

    valve tools

    Are these the tools needed for valve adjustment? Are any more needed besides the basic stuff? http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=7926992320&ssPageName=STRK:MEWA:IT
  19. Y

    rod shifter question

    This is my first post as I just bought 2 SHO's. A 90 and a 92 parts car. I want to convert the sifter to the rod setup off the 92. Do I need any parts to do the shifter conversion besides the obvious shifter and rods. Any other parts on this car that Ford upgraded that would be better...
  20. Y

    rod shifter question

    This is my first post as I just bought 2 SHO's. A 90 and a 92 parts car. I want to convert the sifter to the rod setup off the 92. Do I need any parts to do the shifter conversion besides the obvious shifter and rods. Any other parts on this car that Ford upgraded that would be better...

Latest posts

Forum statistics

Threads
107,093
Messages
1,181,338
Members
16,157
Latest member
poffffd

Members online

Total: 321 (members: 3, guests: 318)

Share this page

Back
Top