Search results

  1. B

    Throttle Peddle Sticking

    Thanks, I only notice it while driving, It doesn't feel like it's sticking when inspecting by hand at either end. The cable appears to be in good shape, nothing seems bent, dirty or out of place, and the floor mat is clear. I'll track down the throttle plate and give it a good cleaning, and try...
  2. B

    Throttle Peddle Sticking

    My throttle peddle seems to stick when first applying pressure, it will then click past what ever is binding and then the peddle operates smoothly. Any ideas?
  3. B

    Shifter Issues

    Thanks!....story of my life, lol. That's great news, I'd be interested in a couple of them!
  4. B

    Shifter Issues

    Thank you both! I will look into purchasing a replacement, but also wonder if this is a piece that could be 3D printed. Since I'm still able to shift, I'll wait till I have a replacement before tearing into it. (Edit: It's my daily driver, so I was hoping it would be something quick and easy.)
  5. B

    Shifter Issues

    Thanks for the link! Do you also have a link to a diagram?
  6. B

    Shifter Issues

    The shifter on my 95 MTX has been giving me trouble and I'm not finding images of what part could have failed. The shift bar, that the shift knob attaches to, spins/turns, not holding it's intended shift pattern. The previous owner said it was due to the failure of some small plastic retainer...
  7. B

    Front Window Motor Replacement

    I have an assortment of clips, but reused all that weren't missing already.... I didn't lube my track, it still had grease on it, and seemed to run smooth.
  8. B

    Front Window Motor Replacement

    AutoZone has both: Front Driver / Rear Passenger: Dorman Window Lift Motor 742-277 https://www.autozone.com/collision-body-parts-and-hardware/window-lift-motor/dorman-window-lift-motor-742-277/54847_334666_0_78655 Front Passenger / Rear Driver: Dorman Window Lift Motor 742-276...
  9. B

    Front Window Motor Replacement

    Thanks, greatly appreciated! I was able to pry on the track bracket, and then easily levered the motor out. The new one took a little more finagling to get it in, but it was easy too! Refitting the door panel was harder than replacing the motor! Thanks for the tip on using a rear motor as well...
  10. B

    Front Window Motor Replacement

    I am in the process of replacing my Front Driver's Window Motor (95 MTX), and after accessing the inside of the door and removing the 3 bolts that hold the motor, I'm now trying to determine if I should try prying it out (as seen in threads on this forum), or should I drill out the rivets. I'm...
  11. B

    95-MTX: Power Falls Flat @ Secondaries

    Yes, it was the MAF, snagged one from my 92. I'll try cleaning it and putting it back in. (Not really wanting to use the 92 as a parts car, lol) Thank you again!
  12. B

    Abnormal Engine... Pulse(?) Under Acceleration

    I was experiencing these symptoms along with my secondaries not kicking in properly, and another MAF (an old one I had), cleared up the issues. (I couldn't even get the TPS off to change it)
  13. B

    95-MTX: Power Falls Flat @ Secondaries

    BaySHO, thanks for pointing out that the fan would kick on shortly. This was a clear indicator that I wasn't aware of, and it helped to know I had it hooked up correctly. I would be interested in a work around too, because the beeps will probably only get worse. Fortunately it's not too bad...
  14. B

    95-MTX: Power Falls Flat @ Secondaries

    Well, I tried the paperclip, and the OBD1 again and didn't get any codes, but did see what part of my problem pulling codes was, I was trying the ABS connector. (Shouldn't that have showed a code since the ABS light comes on occasionally) As for my loss of power, swapping in my old MAF fixed...
  15. B

    95-MTX: Power Falls Flat @ Secondaries

    luigisho: Thank you!!!! I was definitely doing it wrong. I was touching two ports within the triangle shaped plug as I thought I saw on another thread, not on two separate plugs, the triangle and a small gray one.
  16. B

    95-MTX: Power Falls Flat @ Secondaries

    zoomlater: The butterfly levers on the intake appear to be in a downward position, which looks the same with the car running or not running. When accelerating the throttle by hand under the hood, if I were to increase it slowly both would open, however the rear one did seem to stick, or fail...
  17. B

    95-MTX: Power Falls Flat @ Secondaries

    I believe they are in the closed position when the car is running, I will double check. Thanks for the link too!
  18. B

    95-MTX: Power Falls Flat @ Secondaries

    The only noticeable issue was it not wanting to open the butterflies, and after easing into the throttle and holding it down; it hesitantly crept up into higher rpm's. (When quickly jamming the throttle, it quickly revs to 4500 and then just holds there.) To get the code, it took at least 30-45...
  19. B

    95-MTX: Power Falls Flat @ Secondaries

    I've ignored my airbag warning, same as you, but it only chimes in every 1:20/30 startups. Scares the hell out of new passengers, lol. I just tried the paperclip test to read the codes and didn't have any lights on the dash flashing anything. So I assume it has no codes, as seen with the OBD1...
  20. B

    95-MTX: Power Falls Flat @ Secondaries

    Regarding the Check Engine Light, it was a Yellow light that said Check Engine. I do also get a Red ABS light occasionally, and the Airbag warning bell/buzzer goes off on startup sometimes.

Latest posts

Forum statistics

Threads
107,085
Messages
1,181,299
Members
16,152
Latest member
lapochkarr

Members online

Total: 325 (members: 1, guests: 324)

Share this page

Back
Top