Search results
-
A
Clutch or throwout bearing?
I had the same problem. I took a strong spring that just slipped over the clutch cable between the trans case where the cable anchors and the tob arm linkage then hooked the cable back up to the throw out arm. I then placed a 6 inch bolt from the dash to the top of the clutch pedal arm to...- angloman
- Post #36
- Forum: Engine, Intake, Exhaust and Drive Line
-
A
Clutch or throwout bearing?
I had the same problem with clutch adj. I pulled the cable off the clutch fork linkage and put a strong spring between the trans housing and the clutch fork linkage over the top of the cable. Then I placed a 6 inch bolt between the dash and the clutch pedal on top of the pedal of course. This...- angloman
- Post #35
- Forum: Engine, Intake, Exhaust and Drive Line
-
A
Clutch or throwout bearing?
The throw out fork is in excellant shape the throw out fork linkage bushings are a no1 and the old throw out bearing was centered on the pressure plate fingers. I tryed lifting the pedal but there still seemed to be to much pressure on the tob. It dissengauges as soon as I depress the clutch...- angloman
- Post #34
- Forum: Engine, Intake, Exhaust and Drive Line
-
A
clutch adjustment problems
I have just replaced the clutch in my 94 sho. The reason the clutch failed is the tob got so hot that the plastic melted and the ball bearings turned blue and the whole thing exploded and the clutch fingers were damaged. I replaced the disk, pressure plate, tob and had the flywheel resurfaced...- angloman
- Thread
- Replies: 3
- Forum: Gen 1 & 2 - Engine, Exhaust, Drive Line & AC syste
-
A
Clutch or throwout bearing?
So the tob is to be lightly contacting the clutch fingers all the time. I just had to replace my clutch in my 94 sho because the tob got so hot that it melted all the plastic and turned the ball bearings blue and ruined the clutch fingers. After replacing everything I checked the free play on...- angloman
- Post #26
- Forum: Engine, Intake, Exhaust and Drive Line
-
A
Clutch or throwout bearing?
So the tob is to be lightly contacting the clutch fingers all the time. I just had to replace my clutch in my 94 sho because the tob got so hot that it melted all the plastic and turned the ball bearings blue and ruined the clutch fingers. After replacing everything I checked the free play on...- angloman
- Post #25
- Forum: Engine, Intake, Exhaust and Drive Line
-
A
clutch throw out release problems
I have just replaced my 94 sho clutch because the throw out bearing did'nt release and it burned up. The metal and ball bearings turned blue from the heat. Upon replaceing the pressure plate, disk and throw out bearing and resurfacing the flywheel I checked the throw out bearing free play...- angloman
- Thread
- Replies: 0
- Forum: Gen 1 & 2 - Engine, Exhaust, Drive Line & AC syste
