Search results

  1. R

    Stock tire size rubbing strut housing

    Could excessive drag racing make it cut into a tire all the way around if say its a 225/55/16. my son just took off a set and they look tooled down to the wire bout a half inch in from the inner tread. A trench to say the least. He tends to burn it up warming up for his launch.
  2. R

    Stock tire size rubbing strut housing

    okay, same prob on 95 mtx, stock wheels and tire size. no probs with suspension, up and down problem rubbing. With car on stands and pulling up on tire with long jack handle, no movement. Could it be brand of tire, curve of sidewall? Never had this prob in past. It ate deep into previous 225/55/...
  3. R

    Brake Proportion Valve assembly for 95 mtx?

    Thanks to all who tried, Storm-Chaser hit the nail on the head. I`m continuing with this on the "Brake Line Bypass?" thread highlighted by Storm-Chaser above. For now will advise mechanic of opinions here and go from there. I just hope it`s a little easier fix since all lines to rear were...
  4. R

    Brake Proportion Valve assembly for 95 mtx?

    Let me clarify, the line blew so close to the small box that there`s no replacing the line alone. i`m told the box with the pre pressed in lines has to be replaced as it comes as an assembly. So i guess it`s to find a parts car for this or try to find new hopefully? Thanks Again Also i`m...
  5. R

    Brake Proportion Valve assembly for 95 mtx?

    It`s the small block in the hard to see /get to place. And they are a b. i`ll let u know something. Trying to locate N.O.S. or replacement part nearby. Thanks
  6. R

    Brake Proportion Valve assembly for 95 mtx?

    Greetings All, We have a 95 3.0 MTX Sho with no brakes. Found that the small box that several brake lines are pressed into on the drivers side inner fenderwell has a corrosion problem on the pressed lines going in. Luckily the line blew a hole just as my son was getting home (unknowingly). Next...
  7. R

    rpm fluctuation and miss bumpbump

    thanks gentleman and scholars of the "SHO". i will proceed to change plugs and coil on #3 and see what happens. thanks, alan cam weld will come next then have the ecm programmed with good stuff. If Doug can help me out there.
  8. R

    rpm fluctuation and miss bumpbump

    update ran fuel injector cleaner thru system changed fuel filter and check light went off for a few days and idle and running got much better. then the check light came back on after wife got fuel at enmark. ran codes and it says misfire on cylinder #3. so i`ve put more cleaner in and water...
  9. R

    rpm fluctuation and miss bumpbump

    i have a 97 with 128,000 miles, ford dealer wifes car since new. stack of service records every 3000 miles but when plugs were recommended wife declined $60 charge at her own dealership to do this. i bought car and it ran great until recently. i cleaned tb and iac and have k & n panel filter...
  10. R

    Stuttering at idle

    yea what was it?
  11. R

    95 MTX stall... O2 codes

    my problem solved shorty, have you checked yours? later
  12. R

    95 MTX stall... O2 codes

    found my problem, o2 sensor on exhaust bank 1 was a 4 prong connector and it was supposed to have the 3 prong connector. in otherwords someone put the wrong o2 sensor on the car before i got it.
  13. R

    95 MTX stall... O2 codes

    i`m having the same exact problem as Shorty, guess i`ll go to my long time ford mechanic,( now independent shop owner) and see if he can pin this down. mine "95 mtx" 3.0 is drinking fuel and hard to start throwing 172 at me running lean etc., runs like hell at wot seems to run okay mostly but...
  14. R

    Grey SHO embroider floormats

    thanks guys, Now if someone has some grey sho floormats contact me please with pics and a price to [email protected] (thats for my 97 sho)
  15. R

    Grey SHO embroider floormats

    I need floor mats for a `97 with grey interior with the sho stitching. thanks
Back
Top