Search results

  1. jelloslug

    Window Air Leaks

    The door striker can cause problems like that also. If the little plastic part is worn or missing the door won't close tight.
  2. jelloslug

    upgrading to carburetion

    The entire thought sounds like a bad idea.
  3. jelloslug

    Door latch thingy

    I replaced them all on my '90 with the ones from the HELP section. The doors shut like new now.
  4. jelloslug

    Emblem Adhesive

    Glue will just make a mess. Use the 3M tape.
  5. jelloslug

    eatc

    It's up near the firewall. You need to take the dash out to get to it.
  6. jelloslug

    eatc

    Sounds like a blend door actuator problem for the temperature and a blower control module problem for the blower speed.
  7. jelloslug

    Project '95 Restoration

    You need to make the Ford emblem flip up and then hide the block heater plug there.
  8. jelloslug

    Wiring Harness

    A harness from a 90 or 91 should work. There were no major changes between those two model years. The body harness is the complete dash harness and then it runs through the firewall and splits into two directions: One running across the upper firewall to the passenger side strut tower and the...
  9. jelloslug

    blower motor resistor bad? bd actuator? HELP

    You don't have a blower motor resistor then. There is a PWM blower controller that controls the fan speed. It sounds to me like your evaporator drain is clogged and the motor controller is getting wet. The motor controller is on the underside of the blower housing (behind the glove box). You...
  10. jelloslug

    JBL/PREMIUM Sound System Help-question

    The blower motor is on a seperate circuit. There is another problem with the radio.
  11. jelloslug

    NOS MTX-IV Syncros and Blocking Rings

    we are getting a new 5 axis mill at work.....
  12. jelloslug

    blower motor resistor bad? bd actuator? HELP

    Do you have digital climate control or three knobs?
  13. jelloslug

    Gen 3 Subframe Mod

    The endlinks are not the same. The 3rd-4th gen end links are turned 90° compared to the 1st-2nd gen ones.
  14. jelloslug

    "Normal" steering rack

    Tonight I had my wife turn the wheel back and forth while I had my hand on the tie rod. You could definitely feel some kind of clicking in the tie rod as it moved in and out. It was very regular and in the same spot every time.
  15. jelloslug

    "Normal" steering rack

    End links are new as well as the mount bushing.
  16. jelloslug

    "Normal" steering rack

    ZF rack. I don't feel any unusual movement in the tie rods.
  17. jelloslug

    "Normal" steering rack

    Gen 3 shaft. I just checked the column and there seems to be no play all the way down to the rack. To me it seems to be either the pinch bolt at the rack or something further down.
  18. jelloslug

    "Normal" steering rack

    I would imagine that my problem is in the column or the joint.
  19. jelloslug

    "Normal" steering rack

    That's what I wanted to hear.
  20. jelloslug

    Can upper seatbacks be swapped left/right?

    It's easy to swap the seat upholstery. These people are just a bunch of whiners.

Latest posts

Forum statistics

Threads
107,117
Messages
1,181,610
Members
16,171
Latest member
jzero391

Members online

Total: 545 (members: 1, guests: 544)

Share this page

Back
Top