Search results
-
W
Rear Cam Seal
Ive been reading up on this issue, thought I would get your opinions if you think Ill be ok with trying a new seal. I believe this was a Felpro I tried using, but I had scratches also. Not only on the wall, but from getting a screw in to deep and bottoming out. What can I say, it was a...- Wade
- Thread
- Replies: 3
- Forum: Gen 1 & 2 - Engine, Exhaust, Drive Line & AC syste
-
W
Radiator Fitment
Going to take a trip to the junkyard to try and find a radiator, any other radiators a fit for a 93 atx? Like other normal taurus or something? Thanks.- Wade
- Thread
- Replies: 1
- Forum: Gen 1 & 2 - Engine, Exhaust, Drive Line & AC syste
-
W
Your thoughts on these codes, 172, 136, 332
Lean and EGR it seems from reading up here on the site. Already did a complete 60k front and upper, minus the valves. New gaskets all the way around. This eliminated all my other codes, runs a little better, but not great. This weekend Ill pull the intake and clean out the EGR tubing as...- Wade
- Thread
- Replies: 3
- Forum: Gen 1 & 2 - Engine, Exhaust, Drive Line & AC syste
-
W
Few questions to ease my mind.
93 atx, so sore from working on this car I figure Ill take some time off and get my mind straight on a few issues. Amazing how the years sneak up on you and just bending over a hood hurts now. I finished up doing both services except the valves: cam/crank sensor, seals, belt, water pump, temp...- Wade
- Thread
- Replies: 3
- Forum: Gen 1 & 2 - Engine, Exhaust, Drive Line & AC syste
-
W
What usually goes out on the front for an oil leak?
1993 3.2 Auto. I pulled intake off and cleaned it up, replaced gaskets (did not have a intake gasket on it, just metal to metal), put in a thermostat (did not have one before), new wires and plugs, then changed oil and coolant. I was getting codes 116, 118, 336. It was running extremely rich...- Wade
- Thread
- Replies: 8
- Forum: Gen 1 & 2 - Engine, Exhaust, Drive Line & AC syste
-
W
Spark plug seals
When pulled the spark plugs I had rubber seals down at the bottom of the wells where the plugs screw into the head. Few were all cracked up and deteriorated, few pieces I would imagine fell into the cylinders, I just didnt even realize they had seals down there at first. Anyhow I will rig up a...- Wade
- Thread
- Replies: 8
- Forum: Gen 1 & 2 - Engine, Exhaust, Drive Line & AC syste
-
W
How to figure out what size engine?
I just purchased a 1993 Taurus SHO. It had some front end damage and who knows what else done to it. Where do I find a stamping or what not so I know exactly what motor I have? Its automatic so I guess its the 3.2, but I have no idea if it may of been changed out at some time for another year...- Wade
- Thread
- Replies: 18
- Forum: Gen 1 & 2 - Engine, Exhaust, Drive Line & AC syste
