Recent content by perlitaj

  1. P

    Testing fuel injectors

    Is there a reputable business that sells new injectors or remanufactured ones for a descent price. How much?
  2. P

    Alt. and A/C belt tensioner/ idler pulley

    My setup is still working like a champ after 40K; see previous writeup. I do not baby the SHO either. Every light is still a new race.
  3. P

    Idle problems

    Mkostinec, again where you at with this. Mine problem is exacxtly the same as yours. I replaced the MAF and a little better but not a rock steady idle like it was before. I suspect it's a sensor but don't know and don't want to replace them all.
  4. P

    Idle problems

    Did u ever fix this, mines doing the same thing. Surging until it dies.
  5. P

    Get me started

    Sorry, I replaced that first thing
  6. P

    Get me started

    94 MTX, engine dies at stoplights, surging idle othertimes. Cleared codes and KOEO got 111, stored were 173, 177, 528, 542. CEL came on in the past (for short periods) but hasn't in a while while driving. Seems to run fine with secondaries opening and all, just poor or no idle. From research...
  7. P

    Need some experts on this one

    alternator or starter is what I meant to say
  8. P

    Need some experts on this one

    ProjectSHO, Sorry about the terminology, "draining off." My bad. What does FWIW and BTDT mean? I replaced the switch with a new Ford switch to no avail. It's something prior to the switch because I jumper it at the switch right now. I last looked at a diagram years ago but I thought the...
  9. P

    Need some experts on this one

    The computer was replaced with original fixes as well as the ccrm with both parts still in there and working. Ignition switch was replaced with a new one from advance auto parts later and still no "start" batt volts across the sensors via the red/green striped wire. Only in the run position...
  10. P

    Need some experts on this one

    Here was the deal. Once again I decided to tackle the problem after some more thought. I bought a 2004 Mercury Maruder so the SHO was put on the back burner. The DIS was bad from Ford and yes it was a new part. The car was running on two cylinders with no spark to the back four cylinders on...
  11. P

    No spark (cont. "from for the experts only")

    Just returned from a deployment to the sand box and once again tried to start the SHO. Trouble shot further and turns out the battery voltage across the CKP, coil, and ignition fuse is good when in run position but drops to zero when I turn to start. Looked at wiring diagrams and saw the...
  12. P

    Need some experts on this one

    Yes, normal illumination. Bright
  13. P

    Need some experts on this one

    Mr. Anon. What is a good way to check the CCRM since it didn't come up faulty with a code? I was thinking a fuseable link due to the way it was running (almost too good) and the way it quit. Is there a common area that most fuseable links are located and where? Help!
  14. P

    Need some experts on this one

    Replaced it with the CKS so it's new.
  15. P

    Need some experts on this one

    Also, the ignition fuse is good, strong CEL prior to cranking, tested good ground with DMM between Battery and manifold (for DIS).
See more

Latest posts

Forum statistics

Threads
107,077
Messages
1,181,199
Members
16,142
Latest member
Kaevorlly

Staff online

Members online

Total: 539 (members: 2, guests: 537)

Share this page

Back
Top