Recent content by idaeus

  1. idaeus

    BOO replaced, still shifts from Park

    I guess I need to pull console out and have a look at the cable you mention. I have only had the car a couple of months, and don't know what recalls may have been addressed. Will ford still address these recalls? If there is any way to tell if this recall has been done, please advise. I'll let...
  2. idaeus

    BOO replaced, still shifts from Park

    On 93 ATX: I had a BOO code, and my shifter came out of park anytime (key out, on, etc). I replaced the BOO, no code anymore. BUT, I can still shift out of park anytime. All fuses are good. My cruise does not work, so I wondered if both problems could be from my cruise deactivation switch...
  3. idaeus

    Rod Bearings Help

    93 ATX 124K. I just finished my bearings, putting all back together now. Journals looked nice, some copper showing. Never heard anyone mention that you should do a break-in after this job, that is: driver her easy, low rpms for x number of miles........
  4. idaeus

    Rod Bearings Help

    I am in process on my rod bearings (4 of 12 done), it's not that bad. mine the forums, there's alot on here. it's the first time i've ever worked one of these engines, and i've found if take my time and do my homework, things turn out.
  5. idaeus

    Update on 60K front, next......

    starting it up the first time was a little scary! but, since it went well, i am a inspired to move on with the rest. cheers,
  6. idaeus

    Update on 60K front, next......

    93 ATX, 124K, ill treated by past owner. Thanks to forum, I just completed my first 60k front. This included a harmonic balancer, as mine had started to separate at the dampener, all 3 cam seals (only took an hour, the one under the sensor leaked like a sieve), timing belt, water pump, crank...
  7. idaeus

    Front 60K, Accessory Tensioner

    I am doing my front 60K on a '93 ATX. When I removed the accessory belt tensioner, the small line up pin (i guess this is what it is) snapped off , and is sitting in engine. Is this repairable by taking back of off tensioner and mounting a new line up pin, bolt, etc? Thanks in advance.
  8. idaeus

    Progress on 60K Front

    vermin aww, he's kind of cute, but dead. i had to shopvac between my heads, it was a ton of small bones, fluff, and parts of my car (no doubt) it made a nest from.
  9. idaeus

    Progress on 60K Front

    Anyone know where to find the o-ring between the water pump housing and engine? I checked 4 parts stores, nothing, stuck........ will this be what i need? FEL-PRO Part # ES70426 More Info {Water Crossover Mounting Set} DOHC Engine
  10. idaeus

    Progress on 60K Front

    pics if pics don't work, see here: http://www.angelfire.com/sc2/WFH/picss/ (not that exciting) got CPS off, replaced phillips with hex, buidin' it back up...........
  11. idaeus

    Progress on 60K Front

    I thought I'd share some progress with doing a front 60k, my first(thanks Phoenix project!). I am down to the CPS and crank seal. The CPS heads are sort of stripped, so I am working on teasing these screws out. Interesting, there was a mouse nest(a bunch of garbage, bones) down between the...
  12. idaeus

    headlamp mounting panel

    got it I picked up the mounting panel from a nice sable, perfect match. Anyone know if black bumper core on front of sable is same for '93?
  13. idaeus

    headlamp mounting panel

    What would you like for that part?
  14. idaeus

    headlamp mounting panel

    oh, i see Thanks to all who posted here, I don't know what I'd do without this forum! I might take you up on the used one, I'll check for a sable on my junkyard trip this weekend. Odd though, is this part on rockauto the whole part for only $19.99: Headlamp Mounting Panel VARIOUS MFR Part #...
  15. idaeus

    headlamp mounting panel

    I searched the posts.......can't seem to determine if I can use a headlamp mounting panel from a sable or other ' 93 taurus. Rockauto does show different part numbers for each, so....... Thanks,
Back
Top