Recent content by Cal93sho

  1. C

    received 95c Motorcraft thermostat, correct or not? (PICTURES)

    Just an update, I am on a third thermostat already and all three that I have ordered come in a same box/packaging but with a wrong thermostat inside. Looks like someone at motorcraft missplaced alot of thermostats.
  2. C

    received 95c Motorcraft thermostat, correct or not? (PICTURES)

    Check rockauto, it shows rt1203 for 94 atx
  3. C

    received 95c Motorcraft thermostat, correct or not? (PICTURES)

    Couple days ago I ordered new Motorcraft thermostat for my 1994 ATX from some parts store on ebay, so I receive the part today, open the package, and the thermostat has 95c stamped on it. The part number printed on the box is RT-1203-F4TZ-8575-CB. The listing said "Motorcraft RT1203 190f/88c...
  4. C

    getting code 341

    And what exactly is "Octane jumper"?
  5. C

    getting code 341

    I have a 94 ATX, had couple of codes popup recently and was able to figure them out except one, keep on getting code 341 when doing KOEO test, anyone knows whats it all about?
  6. C

    Swaping Gen1 ECM with Gen2 ECM?

    I probably could or should, but for some reason I don't have the check engine light on.
  7. C

    Swaping Gen1 ECM with Gen2 ECM?

    Because my car started running rough, RPMs dropped, and it sounds like a Subaru. I checked all the cylinders and all of them seem to have a spark, so I decided to try and swap the ECMs, I have a 1991 SHO in my backyard that I am using as a parts car on my 1993 MTX that I drive everyday, so I...
  8. C

    Swaping Gen1 ECM with Gen2 ECM?

    I have a 1993 SHO and want to swap the computer ECM from 1991, does anyone tried it or know if it will work?
  9. C

    car running rough seems rich

    Mine had the same stuff happening with RPMs that you are talking about plus engine sounded like a subaru, changed the DIS and now back to normal. Good luck.
  10. C

    Best Strut/Spring Package?

    Since everyone is talking and giving adwice about konis, I have a question that I cant seem to find anywhere. I was installing koni inserts yesterday and after I took the inside of my old strut out and inserted the koni in, it would'nt sit tight in there (at the top) it would move a bit, is the...
  11. C

    GTP Tubular Rear Controll Arms

    By installing Aluminum Subframe Bushings will you feel the vibrations of the engine more then with the stock ASBs?
  12. C

    will new strut mounts improve ride quality? (absorb road bumps better)

    My bearing is bad, it makes a horible scraping noise in the left strut tower, plus when you take the bearing out and turn it with your hands it should feel smooth without any scraping sounds, mine feels like its full of rocks insted of bearing balls, anyways there was one other question that...
  13. C

    will new strut mounts improve ride quality? (absorb road bumps better)

    How can a mount go bad? its a huge and thick piece of rubber, my car is a californian car so it seen almost no snow or salt, mount has no cracks in it, and it feels so solid that you can probably run a tank over it and it still be ok to install, i dont know maybe its just me thinking that way...
  14. C

    will new strut mounts improve ride quality? (absorb road bumps better)

    I need some advise from someone who replaced their old strut mounts with new ones, i am going to install new struts (koni) with new springs (intrax) and i was planing on buying new bearing for my old mounts, but my question is should i buy new mounts as well? will i feel any diffrence in the...
  15. C

    Need a right rear quarter panel

    You can get what you need at pick-and-pull or some junk yard like that, the quarter panel should be less then a hudred dollars since sho has a regular taurus rear quarter panel and there are ALOT of those cars there...
See more

Latest posts

Forum statistics

Threads
107,093
Messages
1,181,338
Members
16,157
Latest member
poffffd

Members online

Total: 309 (members: 1, guests: 308)

Share this page

Back
Top