Front fender emblems swap

[SHO60K]

Does anyone know if the new 2013 SHO front fender emblems will fit in the 2010 to 2012 SHO? The 13 emblem looks way better with the SHO writing. I would like to switch them out if possible.

 

[TRBOSHO]

Should be a direct swap. the non-SHO 2013's use the same as the 2010-2012 Taurus and SHO and the fenders seem to be the same between them (the 2013 Taurus models and the SHO). Unfortunately the part numbers can't be ordered yet. I already obtained part numbers and tried to order them. Only the non-SHO badge is listed so far.....

 

[SHO60K]

Yeah I saw that you cant order them yet also guess ill keep checking evrey few weeks maybe they will be out this summer hopefully. Thanks for the info

 

[Paranoid]

Are you looking to get these directly from Ford?

 

[SHO60K]

Yeah was just looking on Fordparts.com unless you know another place I can get them.

 

[Paranoid]

How do these emblems attach? Glue strips?


Please let us know if you spot them available.

:thankyou:

 

[TRBOSHO]

They just snap in. The clips are built into the plastic. You just open up the inner fender toward the back and pinch them with your fingers from behind and it just pops out....

 

[shaker281]

They just snap in. The clips are built into the plastic. You just open up the inner fender toward the back and pinch them with your fingers from behind and it just pops out....

Good to know!

 

[PDXSHO]

What is the PN? (Yes I am to lazy to look it up )

 

[SHO U UP]

Been talking to Ford's parts department for two days and these are not easy to come by yet. They are looking for a price on them now. They were able to get the part numbers (I didn't get them though) when I supplied a 2013s VIN to them. Looks like they just became available on 4/30/2012. I'll keep you guys posted on what I find out.

 

[TRBOSHO]

They're finally in and on the car.......

Crappy pic, but I didn't feel like getting it out of the garage.....

 

[SHO60K]

Nice to bad my local dealership sucks and cant get them yet.

 

[Zylfrax791]

Anyone ever get the part number for these fender emblems?

 

[MNRubyRed2013]

Part numbers are: DG1Z16178A, DG1Z16178B. I put them on my 2010, it was really easy. Just make sure you don't scratch the paint as you pull the old ones off.