Search results

  1. G

    ac clutch replace

    need ac clutch for my 93 atx and theres more than one option none of which look like what i took off ... so ? is there a part number or definite answer on what to buy ... was also told that there were three different air compressors used in the 93 SHO stock ... true or not i dont know but just...
  2. G

    Is this true?

    I am going to check timing, spark and compression over the next couple of days. I was wondering if anyone knew what the compression should be, should it be the same on all?
  3. G

    Is this true?

    I guess I will go back and check timing and spark this weekend. By any chance is there anyone that lives in the Columbus area that is pretty versed in these engines that may be willing to assist? I think I have posed this question before and got no response but I figure it can not hurt to ask...
  4. G

    Is this true?

    I have replaced the ECT and still nothing. I am not sure what else to look for, does anyone else have any suggestions? I can not begin to tall you how frustrating this is!!
  5. G

    Is this true?

    I am trying to locate an ECT now, if I can get one today I will put it on and let you guys know what happens. thanks for all of the help so far.
  6. G

    Is this true?

    The spark plugs are brand new, I just put them in yesterday. My timing belt is also in the correct place. Around how much is the ECT and how difficult is it to put in? I do not know where exactly it is at. I will give it a try I guess, I don't really know anything else to try.
  7. G

    Is this true?

    What does that mean?
  8. G

    Is this true?

    I can hear the fuel pump when you first turn the key on. As far as I know the plug wires are correct, I put them back on the way I took them off when I replaced the plugs. As far as trying to catch or sputtering, it seems to sputter when I am pressing the gas and cranking the car, every now...
  9. G

    Is this true?

    Okay, well I just called Ford to see about some spark plug wires, they want $319.00. I think that a little much, is there any other type of wire that I can get, NAPA has a set for $126 and they are beldon I believe they said, I do not know much about these.
  10. G

    Is this true?

    When I pull my codes I am getting a 111 - system checks okay. Now I am really confused.
  11. G

    Is this true?

    I have not recently, the last time I did I got one for coolent temp censor and somthing else that would not cause this problem, I posted them previously I will go back and see what they were. Will you really get a good read if the car will not even start? I will try to pull the codes tomorrow...
  12. G

    Is this true?

    So, I am still at a complete loss!! The car is still just cranking, just to humor Ford I put a new computer in and the car still wouldn't start. I also check all of my plugs, they were fried and I had a couple with oil in them, so I replaced all the spark plugs and the valve cover gaskets. I...
  13. G

    Is this true?

    So, I got my car towed back from Ford. While I was talking to the techs I was told that they called the Ford Tech hotline and Ford told them that it was an interference engine, and that is why they say I have possibly bent valves because my timing was for teeth off at the crank. Also I was not...
  14. G

    Is this true?

    I believe I gapped the CPS correctly, I did not replace the pieceof the water pump that actually attaches to the block so I did not need to remove the timing belt. Since the Crank Position Sensor and Cam Sensor are new should I go ahead and replace the PCM, I can get a remanufactured one...
  15. G

    Is this true?

    It is a 93 ATX. The car was running fine then I changed the water pump and thermostat, I did not remove the timing belt to change the water pump. After I got everything back together the car would not start, it had spark and seemed to have fuel. I replaced the Crank Position Sensor and...
  16. G

    Is this true?

    My car was not running and I could not figure out why so I took it to the dealership. At fist they told me that the car would not start because my timing had jumped. now they are aying that the timing was off by four teeth and that it still will not start because I need a new PCM. They also...
  17. G

    Need Assistance

    I am wondering if there are any SHO mechanics in the Columbus, OH area that might be willing to help me get my SHO running again. I am completely out of ideas and I do not want to take the car to Ford if I don't have to. Plus I am trying to sell my house and buy another one and I do not want...
  18. G

    At a Complete Loss

    So I replaced my CPS, put everything back together and I still can not start my car. I took my Ignition module to NAPA and had it tested and they said all was good, they ran a test on it 3 times and it passed all three. I did a ohm test on my coil back and from what I can tell it seems to be...
  19. G

    At a Complete Loss

    I have read in a few different post that say when replacing the CPS you need to gap it to 0.03. what and how do you gap it? I just received my new one and I do not see where it is possible to gap anything.
  20. G

    At a Complete Loss

    I have triple checked the items that I touched during the service and can not find anything wrong. I had a couple rags in place so that any coolant that came out of the water pump did not directly get on the timing belt. I can not see where I damaged the CPS from moving out of the way a little...

Latest posts

Forum statistics

Threads
107,087
Messages
1,181,308
Members
16,153
Latest member
lapochkarr

Members online

Total: 345 (members: 5, guests: 340)

Share this page

Back
Top