Search results

  1. SnuffyTheSeal

    Slight studder

    Not always. If it's small enough or in the right place it won't pick it up. Noisemaker on mine leaked under load and I never got a code out of it.
  2. SnuffyTheSeal

    PTU Leak - Output Seal or Case half?

    Hi all. Had my rig up in the air today to put on a new torque mount (thanks Tony!) Had some oil built up on the bottom side of the PTO near the output shaft. In the picture you can see where it was goobered pretty good with sealant. That's been there since I bought it. Is this the output seal...
  3. SnuffyTheSeal

    Suspension Upgrades, Parts and Pieces

    Howdy all. Looking to do some suspension upgrades this spring/summer now that the toy is back out to play. I've picked up an AD Torque Mount, and I'm looking to put this boat on some H&R springs. Past threads have mentioned switching to the PP Struts if you're not already on them to help with...
  4. SnuffyTheSeal

    Police interceptor pads vs PP

    I went with a Powerstop kit and have had very good results. Have been through the wringer too dodging deer up here in the thumb of MI. Can't believe I haven't warped a rotor yet.
  5. SnuffyTheSeal

    SHO Subframe differences.

    I may be wrong (others may know more) but newer ones may be missing the ears for the front transmission torque mount. Ford deemed them unnecessary and removed them, but some newer years still had the ears on the frame under the radiator.
  6. SnuffyTheSeal

    Sputtering when acceleration

    Sounds like blow off valve kicking in if you hear it audibly kick out air. I had a loose vacuum line on the boost solenoid that was causing the BOV to flutter open like you described before coming completely off and staying open completely.
  7. SnuffyTheSeal

    Loss of boost

    The oil residue doesn't typically hurt anything just looks like crap. If you're VTA modded you'd usually hear it hiss when you floor it if it was a BOV issue. The valves are after the sensors and if the boost is escaping there you wouldn't (typically, in my experience) have a code. So this is...
  8. SnuffyTheSeal

    Nitrous control panel location???

    Really depends on how much you're willing to cut up your interior. I got rid of the cup holders on my catfish camaro to wire a panel in. If you're not willing to make that sacrifice, if you can measure and 3D print to prototype (or if you know somebody that can without killing you on shipping)...
  9. SnuffyTheSeal

    Real Knock Vs False Knock

    Definitely credit to what SM105 said. My SHO has been gas picky ever since I bought it (Marathon in particular seems to run poorly in it) and I've heard others say these cars want at least mid grade when not tuned. Definitely put a little E85 in if possible. If you can't get it easily most part...
  10. SnuffyTheSeal

    Passenger puddle lamp not working even with new light

    To add to this, LED may need a resistor in the line. When I upgraded my interior lights I had to add resistors (just pressed them in the socket with the bulb). Not sure how the puddles function but my aftermarket ones work fine.
  11. SnuffyTheSeal

    Loss of boost

    Check and see if the wastegates/actuators on the turbos are loose in that case.
  12. SnuffyTheSeal

    Loss of boost

    Yep. I had one come off and it stuck the BOV wide open. Didn't set any codes on mine though. Get some small fuel line clamps and secure them on the solenoid. Over time they get stretched and more loose than my ex girlfriend on tequila Saturday.
  13. SnuffyTheSeal

    B pillar Recall

    No update yet, still RNA (Remedy Not Available) and if their turnaround is anything like GM's it'll be another month or two. I used some foam 3M double sided tape (which is probably what they'll use). That stuff is pretty darn permanent though.
  14. SnuffyTheSeal

    Torque Converter Replacement Options

    Have Have been religious with drain and fills, added a couple tubes last time and it's only gotten worse. I don't want to wait any longer on the problem and have the TC blow material through the transmission. Have it parked for the winter and have built up the funds to do the job. See it too...
  15. SnuffyTheSeal

    Torque Converter Replacement Options

    Hi all, starting to get some TC shudder and looks like I'll be replacing the unit. All I've done is a Gearhead tune and probably won't be looking at more power in the near future. Is an OEM my best bet for my situation or are there upgraded aftermarket options worth my while? I get a decent deal...
  16. SnuffyTheSeal

    Fog Lights

    Might have to do this so I can drive my Taurus at night again up here... Need every advantage I can get against the White-Tailed Menace.
  17. SnuffyTheSeal

    2010 SHO Ghost chimes.

    Any lights come on when it chimes? Have you checked for codes with Forscan? Chime sometimes plays with advancetrac or TCS issues.
  18. SnuffyTheSeal

    Why no one makes custom taillights for the 4th gen

    Aftermarket support on these cars is very low, both in body and motor/trans. There's a few guys here who have gone bonkers with their builds (If I had the time and money I'd totally look into going down those routes) and achieved great results, but if flat out performance and customizability are...
  19. SnuffyTheSeal

    Why no one makes custom taillights for the 4th gen

    Just tint them. That's what I did. If you do a good job it'll hold up for at least two or three years, and if you get an agitated cop who wants to give you the run around you can peel it off.
  20. SnuffyTheSeal

    BOV issues?

    You betcha. I'd put a hose clamp on it if it doesn't already have one. Mine was stretched from age.

Latest posts

Forum statistics

Threads
107,087
Messages
1,181,310
Members
16,153
Latest member
lapochkarr

Members online

No members online now.
Total: 382 (members: 2, guests: 380)

Share this page

Back
Top