Search results
-
D
Starts but stalls when hitting fuel
Ok so update on the car. I finally think I found the issue. I was about to start disassembly to replace the timing belt and crank, CID, and a bunch of other things but before hand I figured I would look for more vacuum leaks while it would idle. In the process I found a spark plug wire that was...- Dmaan87
- Post #18
- Forum: Gen 1 & 2 - Engine, Exhaust, Drive Line & AC syste
-
D
Starts but stalls when hitting fuel
Ok I will do some troubleshooting and see where I get.- Dmaan87
- Post #17
- Forum: Gen 1 & 2 - Engine, Exhaust, Drive Line & AC syste
-
D
Starts but stalls when hitting fuel
It doesn't run at all now it just cranks and cranks which is why I think I need a crank sensor. I cleaned the MAF already. When it did run it was sluggish and had no power.- Dmaan87
- Post #15
- Forum: Gen 1 & 2 - Engine, Exhaust, Drive Line & AC syste
-
D
Starts but stalls when hitting fuel
From my experience and faulty MAF shouldn't keep the car from running. Could I possibly have a bad crank sensor as well.- Dmaan87
- Post #12
- Forum: Gen 1 & 2 - Engine, Exhaust, Drive Line & AC syste
-
D
Starts but stalls when hitting fuel
Ok so I have the codes correct I think. 118, 122, and 126. Does anyone know where I should go from here. I'm not overly concerned with the coolant issue but I've already check the wiring to the TPS, and I have no idea where the MAP is on this thing. Now the car won't run at all which makes me...- Dmaan87
- Post #10
- Forum: Gen 1 & 2 - Engine, Exhaust, Drive Line & AC syste
-
D
Starts but stalls when hitting fuel
https://www.facebook.com/permalink.php?story_fbid=10153599174183652&id=662418651 That's a link to the video. I have 5 volts to the power wire at the TPS and was checking the signal today and noticed it was running smooth so I think I have an intermittent TPS issue.- Dmaan87
- Post #9
- Forum: Gen 1 & 2 - Engine, Exhaust, Drive Line & AC syste
-
D
Starts but stalls when hitting fuel
What is messing me up is first thing in the morning the car starts right up and as long as I don't hit the gas it will idle fine. As soon as I start to drive it stalls out on me. Could it be a signal issue from my TPS??- Dmaan87
- Post #6
- Forum: Gen 1 & 2 - Engine, Exhaust, Drive Line & AC syste
-
D
Starts but stalls when hitting fuel
The file is too large to post. I think it's code 122 and 116 but different sites list different issues.- Dmaan87
- Post #5
- Forum: Gen 1 & 2 - Engine, Exhaust, Drive Line & AC syste
-
D
Starts but stalls when hitting fuel
I have pulled the plugs and established it is not an injector or fuel related problem. I have a video of the check engine light blinking to give me a code but I'm unsure what the code actually is. I'm not sure if the tach moves when cranking I will check tomorrow.- Dmaan87
- Post #3
- Forum: Gen 1 & 2 - Engine, Exhaust, Drive Line & AC syste
-
D
Starts but stalls when hitting fuel
So I have a 95 SHO MTX and I'm having a stalling issue when I hit the fuel pedal. After it stalls it will crank but will not start unless I hold the fuel pedal down but then it sputters and idles high. I'm at a loss I'm not sure if it's a TPS or CPS. Fuel is good and MAF is clean and working...- Dmaan87
- Thread
- Replies: 17
- Forum: Gen 1 & 2 - Engine, Exhaust, Drive Line & AC syste
-
D
Blinkers flashing fast
No I literally changed every single bulb because that was my initial thought. I'll change the flasher relay out and see what happens.- Dmaan87
- Post #6
- Forum: Gen 1 & 2 - Electronics & Audio
-
D
Blinkers flashing fast
Any ideas where I can find an electric controlled one??- Dmaan87
- Post #4
- Forum: Gen 1 & 2 - Electronics & Audio
-
D
Blinkers flashing fast
I have a 1995 gen 2 SHO with HID that someone else installed and when I bought the car the flashers blinked fast. I replaced several bulbs and still have the same issue. The only difference is now sometimes the right side does not blink at all. I have not replaced the multifunction switch or...- Dmaan87
- Thread
- Replies: 5
- Forum: Gen 1 & 2 - Electronics & Audio
