Search results
-
U
Cranks but won't start
I got it I took the intake back apart and installed the new gaskets and she works. So it was either that or this time I have a better ground than the last time. Oh well as long as it is running now.- unicaller
- Post #3
- Forum: Gen 1 & 2 - Engine, Exhaust, Drive Line & AC syste
-
U
Cranks but won't start
I started to clean up the intake while I had it off doing a water pump, timing belt and cPS replacement. Now it cranks but will not start, I have checked all the connections many times. It is getting spark, and when I take out the plugs the electrodes are wet with gas. It doesn’t back fire and...- unicaller
- Thread
- Replies: 2
- Forum: Gen 1 & 2 - Engine, Exhaust, Drive Line & AC syste
-
U
do you recomend injector cleaner?
I was just wondering, becuse only 96-99 has the Engine options you listed. 3.4L Duratec? :confused:- unicaller
- Post #10
- Forum: Gen 1 & 2 - Engine, Exhaust, Drive Line & AC syste
-
U
do you recomend injector cleaner?
Many injectors do have serviceable (replaceable) baskets. I had them re-placed on my 87 Cav RS. SHOZ123 that looks like it is referring to third gens, do you have anything on first? Detenator: Try cleaner if it doesn’t work you can get them sonically cleaned at many shops, I’m not sure about...- unicaller
- Post #6
- Forum: Gen 1 & 2 - Engine, Exhaust, Drive Line & AC syste
-
U
Running poorly
sdpatt: Got it thumbs_u . Tom: Thank you, I've been a member for a while 'i just don't post much. What part of the Vally do you live in? I live up in North Phoeinx(Cave Creek & Loop 101.)- unicaller
- Post #13
- Forum: Gen 1 & 2 - Engine, Exhaust, Drive Line & AC syste
-
U
Replacement Radiators
i just put in a 2 row radiator from Autozone $168. You just have to 'adjust' some AC lines. It also has a LLT.- unicaller
- Post #6
- Forum: Gen 1 & 2 - Engine, Exhaust, Drive Line & AC syste
-
U
Running poorly
I'm a dunce the plug boot on #3 was split down the sides. I swapped the wire out with one from a set I had lying around good thing that set had a good wire for #3. Thanks every one for the help.- unicaller
- Post #9
- Forum: Gen 1 & 2 - Engine, Exhaust, Drive Line & AC syste
-
U
Running poorly
IAB, I'll check it out. After pulling all of the plugs two of them atr not Double Platinum They are Motocraft Platinum AGSP32PP? The Threds are not Platinum on those two, The other four are Motocraft AGSP32PP, They were all of them are in very good shape but the two single platinums have a bit...- unicaller
- Post #8
- Forum: Gen 1 & 2 - Engine, Exhaust, Drive Line & AC syste
-
U
Running poorly
It runs the same with the MAF dissconnected excpt for the Check Engine light. So I switched it out with a known good one no change.- unicaller
- Post #5
- Forum: Gen 1 & 2 - Engine, Exhaust, Drive Line & AC syste
-
U
Running poorly
The Plugs are Motocraft AGSP32PP according to the SHO FAQ they are the correct ones. Running the car with the MAF sensor disconnected dosen't seem to make much if any diffrence in the way it idles I'm going to take it around the block to be sure.- unicaller
- Post #4
- Forum: Gen 1 & 2 - Engine, Exhaust, Drive Line & AC syste
-
U
replacing spark plugs.
The hardest part is getting the plug boot back on all the way. Just feel for the click. The intake really is not hard to remove you can remove it all as one or even leave it connected to the TB and turn it out of your way. I only take it off when I need to see in the plug wells, or you could...- unicaller
- Post #3
- Forum: Gen 1 & 2 - Engine, Exhaust, Drive Line & AC syste
-
U
Running poorly
The front three plug wells are spotless other than a bit of dust, I will remove the intake to get a better look at the rear three when I get home. I never thought to check the plugs when I saw they were Motocraft. The MAS looked really clean on the inside so I sprayed the sample tube with carb...- unicaller
- Post #3
- Forum: Gen 1 & 2 - Engine, Exhaust, Drive Line & AC syste
-
U
Running poorly
I have just acquired another SHO a 93 MTX, it is running very poorly like maybe the timing is slightly off. I ran KOEO, KOER and the balance test a few times the only code I get is 565 purge canister valve. The car sputters and surges at idle and when accelerating (Almost like a week...- unicaller
- Thread
- Replies: 12
- Forum: Gen 1 & 2 - Engine, Exhaust, Drive Line & AC syste
-
U
1st Gear Shifting
My 92 started doing that three weeks ago then stopped doing it after a week or so, then a few days after it started to shift fine, the clutch disc gave up. So my car is up on stands now, I have the linkage off there is no play in it. If you want to check the linkage it is very easy to take off...- unicaller
- Post #2
- Forum: Gen 1 & 2 - Engine, Exhaust, Drive Line & AC syste
-
U
Stumped with my SHO
I had the same problem with the plug wires. If it happens again run a balance test then un-plug and reseat the plug wires to those cylinder/s. See Shotimes for details on running a balance test.- unicaller
- Post #11
- Forum: Gen 1 & 2 - Engine, Exhaust, Drive Line & AC syste
