Search results

  1. L

    Oil pan removal

    I am currently in the process of replacing the oil pan seals on my SHO. I have the oil pan pryed loose but the pan doesn't seem to want to clear the motor mount to drop all the way out. I tried angling it every which way. What is the trick to getting it out? EDIT: Nevermind. I just got...
  2. L

    Another WISHOC/TCCA meet

    Where: La Crosse, at the mall parking lot just outside of Sears. When: Sunday October 16th @ 3:00PM If you start saving now, you might be able to afford gas to get to this one. :nut: It seems we have the cheapest gas in Wisconsin though. http://www.wisconsingasprices.com/
  3. L

    Rear brakes

    I am trying to replace my rear brake pads. I have the old ones off and I am currently trying to turn the piston back into the caliper. I have been turning it for a good 15-20 minutes and it hasn't moved. I even tried cracking the bleeder screw but that still didn't work. What am I missing here?
  4. L

    Airfest at La Crosse airport next weekend

    Want to make a meet out of it? I hope this is enough notice, I just had the idea this afternoon. You can go to http://www.airfest.com/ for ticket information and the schedule of events. What does everyone think about this?
  5. L

    La Crosse area meet

    There has been some discussion in this thread about a meet in La Crosse. How does the weekend of June 11th sound to everyone?
  6. L

    Lincoln EATC

    I have an EATC off a '96 Lincoln. I want to put the face of that on my stock EATC. Someone on this forum does this for a fee, but I can't seem to find the thread that I saw that mentioned in. :shrug: Can anyone help?
  7. L

    Rod Bearing Questions

    I have what sounds like rod knock coming from underneath my car. I couldn't hear it until I switched from a cat-less y-pipe (loud) to the Midwest SHO y-pipe (somewhat quieter), so I'm assuming that it's probably been there all along. I did a search but came up with 20 pages of results. I'm only...
  8. L

    Keep losing motor mount bolts

    A while back I was having lots of problems losing motor mount bolts. I noticed that the hole on the motor mount was stretched out. I ordered a reinforced motor mount from SHONut. It had nuts that were pressed into the motor mount. When I installed the motor mount I knocked one of the nuts out so...
  9. L

    Factory alarm system

    I did a search and found out that I have the system 4 alarm. I read that it is supposed to be able to use the factory remote keyless entry system. All I had was a remote with an arm and disarm button that works 75% of the time. I ordered a new remote and programmed it. It works for locking and...
  10. L

    Problem with fender bolts

    I was taking off a bolt in the fender to put the hood strut relocation kit on my car and the piece with the threads fell off. It then did the same thing on the other side! :madflame: Now it doesn't have any threads to put the bolts back in with. When I tried to retrieve it, it looked like that...
  11. L

    Engine movement

    I've been having a clunk when I step on the clutch so I suspected bad motor mounts. I followed the test prodecure on shotimes and this is the video I made of it. Motor Mount Test Just wanted to get some other opinions before I went and spent all my money.
  12. L

    Engine cranks but no start

    My car is a '94 MTX, it cranks just fine but it won't start. Fuel tank was quite low (gauge wasn't quite on "E" but light was on) and I thought it might be out of gas so I put some in and it still won't start. I cycled the key to see if it just needed some fuel in the system but to no avail...

Latest posts

Forum statistics

Threads
107,087
Messages
1,181,310
Members
16,153
Latest member
lapochkarr

Members online

No members online now.
Total: 554 (members: 0, guests: 554)

Share this page

Back
Top