Recent content by screaminsho123

  1. S

    HELP!!! EGR Valve Regualtor (EVR) Solenoid-circuit failure!!!

    New update* This is wierd since i pulled the 558 code the car has not stalled on me once (knock on wood) and hasnt had any starting problems(knock on wood) could it have been bcuz it sat for so long! and now its running and the fluid is tuening and such again???? let me know rob:thankyou:
  2. S

    HELP!!! EGR Valve Regualtor (EVR) Solenoid-circuit failure!!!

    no im not a hundred percent sure if they were done i think the previous owner did say that!but i have 102.300 miles on the veichle!
  3. S

    HELP!!! EGR Valve Regualtor (EVR) Solenoid-circuit failure!!!

    558 was the only code that came up!!! however ive been told that the cam or crank shaft sensors could be the cause of this!!!however i didnt get a code for this!!
  4. S

    HELP!!! EGR Valve Regualtor (EVR) Solenoid-circuit failure!!!

    i recently posted on here saying that my rpm gauge was at 0 and that the car was stalling and sometimes not starting and it had a check engine light!! well i pulled the codes and it was 558!!! 558 with my scanner is the EGR Valve Regulator (EVR) Solenoid-circuit failure!! but now what do i...
  5. S

    rpm gauge is at 0 the sho stalls and i have a check engine light!!!HELP!!!!

    LVE out the the engine codes found out the engine code i got the engine code 558 with my actron code scanner! code 558 is the EGR Valve Regulator(EVR) Solenoid - circuit failure!!! what is my next step and is this hard to replace and how much is this part? please let me know thanks again...
  6. S

    rpm gauge is at 0 the sho stalls and i have a check engine light!!!HELP!!!!

    ne other ideas? thanks guys
  7. S

    rpm gauge is at 0 the sho stalls and i have a check engine light!!!HELP!!!!

    :omgsho:sorry i forgot to mention in my post that the car is a 1994 sho 3.2 v6
  8. S

    rpm gauge is at 0 the sho stalls and i have a check engine light!!!HELP!!!!

    hi i bought a sho a few months ago and finally got it on the road approx. 4 weeks ago where should i start? well the car has a hard time starting after being driven for a little bit but when it does start again my rpm gauge stays and reads 0! and i also have a check engine light on!!! then...
  9. S

    trans stuck in P

    hi i need help installing a new brake light switch can anyone help! thanx rob
  10. S

    ABS light on and brake pedal goes right to the floor!!! HELP!!!

    its gotta be the air in the lines!!!!!!!!
  11. S

    ABS light on and brake pedal goes right to the floor!!! HELP!!!

    its gotta be the air in the lines!!!!!!!!
  12. S

    ABS light on and brake pedal goes right to the floor!!! HELP!!!

    i did put more brake fluid in i am going to have the brakes bled tomorrow morning !!!!!!!!!! is this the problem???
  13. S

    ABS light on and brake pedal goes right to the floor!!! HELP!!!

    i changed the front brake caliper today on the right side(passenger side)!! this was my first time changing a caliper!! i didnt relize that the bleeder screw was not tightened! I thought that it was already tightened!!!!! i tried driving the car and i had no ABS light on but a constent brake...
  14. S

    Help Brake Caliper Service Set Got Stuck In Between Piston And Caliper Frame!!!!!!!!!

    thank you!!!!! thanks everyone for helping me last night my SHO is UP AND RUNNING!!!!!! and running STRONG!!! THANK YOU!:) -ROB
  15. S

    Help Brake Caliper Service Set Got Stuck In Between Piston And Caliper Frame!!!!!!!!!

    hi, i was trying to replace a set of rear brake pads(on the right side) i turned my piston(using a brake caliper service kit) and the tool got stuck in between the caliper and the piston!!!:(ive tried heat and using a lot of force (2 people) to loosen the tool but no success!!!!! help how do...
See more

Latest posts

Forum statistics

Threads
107,092
Messages
1,181,336
Members
16,156
Latest member
crystizel

Staff online

Members online

Total: 332 (members: 4, guests: 328)

Share this page

Back
Top