Recent content by gren95atx

  1. G

    Bad starter?

    I have a '95 ATX SHO... For the last few days I've been having this problem... I'll get in the SHO and I'll only get a 'click' when starting ... At first I thought it might be a bad connection because I would get out and reach under the front end and wiggle the wires around the starter a bit...
  2. G

    Subwoffer for Stock JBL System

    NorthernSHO - i was thinking about doing a JL 6W0 in the stock sub location too. it'd be running off a 150watt rms amp (not the stock jbl)... how do you think it compares to, say, a 10w0 in the typical ported box? am i going to be disappointed with the output and kicking myself for not...
  3. G

    help! missing & stumble

    scott - thanks for the advice. i will check those items. i had one question though. when i replaced the DIS about a month ago, the old one had a tacky white substance on the bottom and i put the new one on clean (other than what was left on the intake). is there any purpose to this stuff?
  4. G

    help! missing & stumble

    i replaced the coil pack. still does same thing.
  5. G

    help! missing & stumble

    i ran the codes. on KOEO i got 217 - coil 3 failure. on KOER i got no codes, and cyl balance e test checked out ok. the problem is intermidint (sp?), and when i ran the balance test the car was running fine. does a code 217 DEFINATELY mean that the coil is bad? what else should i check...
  6. G

    help! missing & stumble

    wanted to add one more thing. this conditional happened all of a sudden, it was running top-notch before this. it didn't gradually happen. its like something took a dive.
  7. G

    help! missing & stumble

    i've gotten no CE light. i will run the codes tommorow /w the cyl balance test, first thing. i ran a search, and found nothing. i also tried to look for posts on failing coils (its my guess without further investigation), but found nothing usefull.
  8. G

    help! missing & stumble

    i have a '95 atx. it idles at around 400-500rpm (rough), feels like its not firing on two cyl's. when i accelerate (slowly) up to around 3000rpm or so, it stumbles like its gaining back the lost cyl's. a little history: i had a misfire a couple months ago, determined it was a bad wire...
  9. G

    Automatic Shifter Stuck - HELP!

    anyone else have any suggestions?
  10. G

    Automatic Shifter Stuck - HELP!

    the #1 fuse blows as soon as i put a new one in. i replaced the brake switch. still the same thing, fuse blown right off the bat. could it be the shifter's solenoid (the makes the stop pin lock it in park) be bad, causing it to blow the fuse? obviously its still going on and off correctly...
  11. G

    Automatic Shifter Stuck - HELP!

    thanks for all the replies! i got the car into gear using markus's tip... my brake lights are not working and fuse #1 is blown. the manual says that this fuse also is for the turn signals, but they work (?). anyway. i guess all i need to do is replace the switch... <small>[ August 28...
  12. G

    Automatic Shifter Stuck - HELP!

    '95 ATX. got in my car this morning, the shifter won't go into gear. its acting like i don't have my foot on the break to shift it into gear (but i do). anyone got any quick fixes? otherwise i'm going to have it towed to the ford dealership. and thats no fun. any help would be GREATLY...
  13. G

    bad coil? help! sdpatt, anyone?!?

    please excuse the length of this post - but i really want to get this problem resolved. i need all the help i can get - i'm unexperienced in this, but learning... a little background: about a month or so ago i was getting a CE light (o2 sensor codes). i took it back to performance plus where...
See more

Latest posts

Forum statistics

Threads
107,080
Messages
1,181,219
Members
16,144
Latest member
14blkbeauty

Members online

No members online now.
Total: 567 (members: 0, guests: 567)

Share this page

Back
Top