Recent content by apalmer1
-
A
Rough Running Engine
well i replaced the valve cover gaskets/plug seals as well as the plugs themselves, nobody in town had the wires but i cleaned the ends of them all very thuroughly. This did not change anything at all, the problem is definately something computerized. when i was first running the car i had...- apalmer1
- Post #8
- Forum: Gen 1 & 2 - Engine, Exhaust, Drive Line & AC syste
-
A
Rough Running Engine
my car is a 94, and yes it is an ATX, but its easy to tell weather the problem exists or not because regardless of RPM it will cut out at anything over 1/4 throttle. I sucked the oil out of the plug wells and pulled the plugs and wires and cleaned off the tips of the plugs a little bit to see if...- apalmer1
- Post #7
- Forum: Gen 1 & 2 - Engine, Exhaust, Drive Line & AC syste
-
A
Rough Running Engine
I also have a problem with the engine cutting out past 1/4 throttle, however mine will absolutely not rev past 4,000rpm. My first thought was replacing the TPS, which did not help. After this i checked the pin voltage and resistance reading of all the engine sensors at the PCM, and they all...- apalmer1
- Thread
- Replies: 8
- Forum: Gen 1 & 2 - Engine, Exhaust, Drive Line & AC syste
