Jacobvarnum
Member
Hello, I’m looking to change my ignition control 10amp mini fuse but can’t find the fuse box. 1990, Any help is much appreciated!!
Where is my 1990 under hood fuse box?
- Thread starter Jacobvarnum
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
The fuses are under the driver side dash, near the emergency brake release handle, it pivots down after you release the lever.
Gen1 does not have a fuse box under the hood. Only the one under the dash.
-Chad
-Chad
BaySHO Performance
SHO Member
There is no Ignition Control 10A fuse on gen1s. From the '90 EVTM:
I assume that you have a problem with the ignition circuit to be looking for that fuse:
Could be a blown fuse link:
I assume that you have a problem with the ignition circuit to be looking for that fuse:
Could be a blown fuse link:
Jacobvarnum
Member
Thank you! I have another thread on here with my main problem, I’ll link it and see if you know anything about my problem
Does this sound like a crank sensor?
Hello, I recently replaced water pump/timing belt/cps as part of preventative maintenance. When I got it back together and went to fill it with coolant, I realized the seal on the back of the water pump moved and coolant got obviously came gushing out of there. Got the seal seated correctly...
shoforum.com
BaySHO Performance
SHO Member
Thank you! I have another thread on here with my main problem, I’ll link it and see if you know anything about my problem
Just twigged that you are the author of that thread as well. See my latest response there.Does this sound like a crank sensor?
Hello, I recently replaced water pump/timing belt/cps as part of preventative maintenance. When I got it back together and went to fill it with coolant, I realized the seal on the back of the water pump moved and coolant got obviously came gushing out of there. Got the seal seated correctly...
Similar threads
