Help! Turned off car but only engine stopped all power stll on cant restart.

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

jester7100

New Member
Joined
Nov 23, 2022
Messages
9
Reaction score
2
Location
Olathe
Car stared and drove to work fine and when I turned it off it took 20 seconds for the motor to stop but nothing else turned off. Now it always thinks accessory power is on but if I try to start it just clicks a d says starting system fault. Wtf....
 

Majestic

SHO Member
Joined
Aug 28, 2016
Messages
827
Reaction score
598
Disconnect the battery for about 30 minutes and see if that fixes it.
 

rubydist

SHO Master
Staff member
Super Moderators
Joined
Jun 25, 2007
Messages
7,391
Reaction score
3,247
Location
Denver
If you have had the battery disconnected for 30+ minutes, and as soon as you connect it up the car thinks that the accessories are on, then you have a module problem. There are several modules that are candidates. What are the codes that are set?
 

SHOdded

SHO Member
Joined
Dec 25, 2011
Messages
8,663
Reaction score
4,046
Location
Maryland
check codes, several prevent restart. if it does not crank, it could also be needing a new fob battery or new fob altogether. does it work with key in passive slot in center console?
 

kryptto

Active Member
Supporting Member
Joined
Mar 24, 2023
Messages
208
Reaction score
83
Location
South Florida
@jester7100

Get one of these: https://www.obdlink.com/products/obdlink-ex/

Then pay $12 and get https://forscan.org/

Plug it in and start the car and copy down the DTCs

More than l likely the keyless entry module - but that is a guess of course.


From AllData, potential components that could be your culprit that I would suspect.

The BCM (Body Control Module) controls the operation of the perimeter alarm. It monitors inputs from the RKE (Remote Keyless Entry) system (includes the keyless entry keypad), the power door lock system and the IA (Intelligent Access) system to determine when to arm the perimeter alarm.
 
Last edited:
Top