Fuel Pump Replacement Question

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

95SHOATX

New Member
Joined
Nov 13, 2001
Messages
40
Reaction score
0
Location
Rochester, NY
I am in the process of replacing my fuel pump with a Walbro 155. There is a white part with a gold colored cap that is between the fuel pump and the feed line. Does this get removed and replaced with a piece of hose or do you re-use this with the Walbro pump?
 

sdpatt

Sr. SHO Engr.
Joined
Dec 6, 2000
Messages
9,670
Reaction score
383
Location
Dallas, TX
If that is a check valve or a pressure damper you had better leave it in the line. I remember having to cut off a section of the metal tubing to allow the longer 155lph pump to fit.
 

ryana83

New Member
Joined
Feb 5, 2001
Messages
124
Reaction score
0
Location
Nashville, TN , USA
If you mean this
20026116188887440294191.jpg

then yes it gets removed to put the Walbro 155LPH pump on. Mine, I replaced that section with fuel line hose because the pump wouldn't fit otherwise. I believe this is a noise dampener or something like that.
Hope it helps.

Ryan
 

95SHOATX

New Member
Joined
Nov 13, 2001
Messages
40
Reaction score
0
Location
Rochester, NY
That's exactly what the part looks like. Thanks. As for what the part does, Ryan you mentioned that it might be used as a noise dampner and Scott mentioned check valve or pressure dampner?? I just want to make sure that I don't remove something that I shouldn't.
 

Denny

Taurus Homeland
Joined
Dec 6, 2001
Messages
1,898
Reaction score
168
Location
Atlanta, GA
Hey I just ordered my Walbro 155LPH pump, I'm going to need to cut it up a bit to fit? And Scott said he needed a check valve separately, will I need to order one of those as well?
 

Cohiba

New Member
Joined
Nov 4, 2001
Messages
141
Reaction score
0
Location
Denver, CO USA
When I replaced mine (with a 190 lph Walbro), all I had to do was pull off the part pictured above, and connect the hoses/wires. I didn't have to cut off anything... or add any pieces...

<small>[ June 11, 2002, 03:03 PM: Message edited by: Cohiba ]</small>
 

ryana83

New Member
Joined
Feb 5, 2001
Messages
124
Reaction score
0
Location
Nashville, TN , USA
I replaced my stock 140,000 mile pump for the Walbro 155 LPH pump from SPmotorsports. I do not believe that it is a check valve of any kind.

I know that you do not have to use it because mine runs without that parts for 5 months now with no problem. I just attached a small bit of fuel hose to the attachment on the pump and then clamped it on.

Ryan
 

sdpatt

Sr. SHO Engr.
Joined
Dec 6, 2000
Messages
9,670
Reaction score
383
Location
Dallas, TX
It is a pressure damper and should be left in the line if at all possible.

Scott
 

Denny

Taurus Homeland
Joined
Dec 6, 2001
Messages
1,898
Reaction score
168
Location
Atlanta, GA
So it should be left on???
What other parts do I need for a fuel pump job with the Walbro 155?
 

Forum statistics

Threads
107,298
Messages
1,183,280
Members
16,118
Latest member
FIREMT1977

Members online

Back
Top