Finishing my A/C lines

[Tscholten]

Don't let anyone tell you that installing A/C lines is a cinch. I'm nearing the last few curves and groans installing new accumulator/drier line and the line containing the orifice tube. Everything seems to be going in reasonably well, but I'm wondering if there are any things I should know before I put the battery and battery tray in and take in for a system vacuum and recharge.

My 95 MTX has the accumulator/drier in the front near the radiator however I have seen diagrams with it near the firewall. The new replacement line is the same configuration as the old one so I feel good that I have the correct part. Anyone have and feedback on this?

 

[Rob94]

Feedback....it was a ***** snaking that line along the fender!!! Otherwise, just make sure the garter springs lock into place when you install the line. It helps to lubricate the male ends with refrigerant oil.

 

[I'll sho u]

auto cars have the dryer near the firewall, mtx cars have the dryer up front.