Dash problem

[OzzmanNT]

I have a slight dash problem. Right above the insturment cluster the black part around the cluster has came apart from the dash. (just looks like some glue that WAS holding it together and two screws) I took the screws out and I can't manage to get the bottom of the thing out. How do I get this thing out? If you don't know what I'm talking about goto my site and look at the pictures of the insturment cluster and you will slightly see it.

------------------
1998 Burgandy SHO (Tan/Mocha leather)
K&N panel filter
Mobil 1 Synthetic Oil
Cool Blue headlights (much brighter than stock and look much better)
Installing ride control switch soon
OBD-II diagnostic Module on it's way

Next Mods:
-Borla Exhaust
-Paint brake capilers (or polish them)
-Colgan Bra from CincySHO
-SHO lettering on the doors
-Upgrade intake system
-and probally a few more as I think of them.

OzzmanNT (email: [email protected] AIM: OzzmanSHO)
http://members.tripod.com/shoturbo

 

[SHOTYM2]

I'm glad to see that I not the only ***** to have to go through this dash shit. Once the screws are out, just give it a firm swift yank and it will come out. There is a couple of clips that go into a hole. I would put my hands in the inside opening at the outside of the opening. **** poor explanation I know. I have hd mine out about a hundred times looking for a rattle. When I put mine back in, even the first time, it didn't but up to the top if the IP like it did before I took it apart. There is about a 1/16" gat there now. I also had to reglue the little strip of felt back on the bezel, you'll see. Thats for Squeak & Rattle. Just be careful not to break it when you yank on it. Have a good one!!

 

[OzzmanNT]

Too late now....Carmax fixed my problem and it didn't cost me a thing. I may end up doing it if i replace the plastic peice outlining the gaugues with the silver one later. Thanks.

------------------
1998 Burgandy SHO (Tan/Mocha leather)
K&N panel filter
Mobil 1 Synthetic Oil
Cool Blue headlights (much brighter than stock and look much better)
Installing ride control switch soon
OBD-II diagnostic Module and so far no codes appeared whew!

Next Mods:
-Borla Exhaust (maybe even flowmasters)
-Paint brake capilers (or polish them)
-Colgan Bra from CincySHO
-SHO lettering on the doors
-Upgrade intake system
-and probally a few more as I think of them.

OzzmanNT (email: [email protected] AIM: OzzmanSHO)
http://members.tripod.com/shoturbo

 

[OzzmanNT]

00-20-3 OCT 00 Instrument Panel - Separation of Layers

i belive that tsb is what we are talking about

------------------
1998 Burgandy SHO (Tan/Mocha leather)
K&N panel filter
Mobil 1 Synthetic Oil
Cool Blue headlights (much brighter than stock and look much better)
Installing ride control switch soon
OBD-II diagnostic Module and so far no codes appeared whew!

Next Mods:
-Borla Exhaust (maybe even flowmasters)
-Paint brake capilers (or polish them)
-Colgan Bra from CincySHO
-SHO lettering on the doors
-Upgrade intake system
-and probally a few more as I think of them.

OzzmanNT (email: [email protected] AIM: OzzmanSHO)
http://members.tripod.com/shoturbo