Clay bar - best ROI ever?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Spootcat

Member
Joined
May 7, 2017
Messages
44
Reaction score
53
Reading about clay bar in the posts. Figure this has to be the most painful thing ever. Clay being clay and all. But y'all seem pretty taken with it, so I got the Mothers clay kit.

Holy crap! That's one of the easiest things I've ever done with the most improvement and immediate benefit. I was expecting the clay to be difficult to work and need to be rubbed out with a lot of elbow grease, totally not the case. Left a nice smooth coat behind. I was also expecting it to be easy to drop, but found that it stuck to my hand pretty well. Nice! I also liked how you could mash it into small point for tight corners and how it contoured to the lines in the sheet metal.

One thing I did right, kept a Ziploc sandwich bag in my pocket. When I needed to move from clay to clean up, I put the clay in the Ziploc and in my pocket. Easy to keep it clean and no chance of it dropping on the ground. I have a pea gravel driveway, so even if I thought I could drop it and survive, no way with my driveway!

Would never have thought to try that without the many mentions on the forum. Thanks!

I noted increased slipperiness in two ways. First, Mothers detail bottle kept sliding down the clayed surfaces. Second, cat prints on front of good. Just the front. And sliding back to the grill. Cat tried to jump on car and slid off! Wish I had that on video!

Cheers!

Spoot

Sent from my SAMSUNG-SM-G935A using Tapatalk
 

Hebes10

SHO Member
Joined
Jan 9, 2014
Messages
102
Reaction score
55
Location
Pittsburgh, PA
Just make sure to wax after in order to protect. Claying removes crap from the topcoat and wax too! You are a much nicer person than me; I would have killed at cat that tried to jump on my car!
 

2011TAURUSSEL

2014 SHO LMS Stage 1 V10
Joined
Jun 16, 2013
Messages
916
Reaction score
510
Location
DFW Metroplex, USA
That's the claybar kit I used for about....well since I first heard of Clay bar. At least the kits I use have two bars inside the package and I cut them into thirds. If you do happen to drop onto ground your only out a 1/3 of the bar at a time. Ditto on the wax after and keeping plenty of spray detailer available. Whenever I get a C/B kit I get a extra bottle of spray detailer. Last week in my "Pre Carlisle" prep I washed, clay, polish, glaze, JetSeal and two coats of wax a Carnuba crème was for gloss and shine and a Lava Infusion putty final coat. Everyhing but the C/B kit was Chemical Guys.

Also when you are waxing if you do happen to get a spot of wax that dries on you.......keep a bottle of spray wax handy. I use the spray wax to keep the surface just slick enough to prevent a dry spot on the micro fiber wax removal cloth. Since it is wax going on anyway a little extra touch.
 

SilverSH0

SHO Member
Joined
Nov 17, 2015
Messages
896
Reaction score
828
When one of your pieces of clay gets dirty, I always retire that piece to wheel duty. You can also give your wheels a nice clay to remove brake dust and grime.

But also worth emphasizing you must wax after using the clay bar as it strips all the wax off the vehicle. Also, it's better to use too much **** instead of not enough. If you don't have enough ****, it can cause the contamination to scratch the paint. If you feel it start to drag, more ****.
 

SHOdded

SHO Member
Joined
Dec 25, 2011
Messages
9,069
Reaction score
4,401
Location
Maryland
Sure would have been fun to watch the cat video :D

I too was amazed at the difference a single pass with a clay bar can make.

Former: 1995 ATX, 1992 MTX
 

98SF19

AlphaKennyBuddy
Joined
Oct 8, 2009
Messages
830
Reaction score
182
Location
Florida
It would help their marketing to make the nanoskin mitt in a light color, so you can see the impurities being removed, something I always thought was pleasing to see when using the clay bar.

I've been using clay on my 98 for about 15 years and there are times I'm amazed at the gloss coming off the original paint of a car pushing classic status. The front and rear bumpers and spoiler have begun hazing and getting swirls, but the metal panels are looking fine.
 

RAYJAY

WHO ME ?
Joined
Apr 13, 2005
Messages
1,608
Reaction score
338
Location
UNION DALE PA
even that the nano skin is more grey than black and you still see most of the impurity's coming off he paint, to me it seams like it cleans the paint better than clay
 

SilverSH0

SHO Member
Joined
Nov 17, 2015
Messages
896
Reaction score
828
I've used them both and still use Clay over the Nanoskin. The reason I choose clay is because they both do the same job for what's on my car (both completely remove everything) and a kit with 2 clay bars is $15 vs $50 for the wash mitt. I don't see the purpose for paying nearly 4x as much for something that performs the same. I don't have massive pollen or tree sap because my car is garage kept. I clean off break dust, road grime, and minor junk that accumulates and gives the surface a rough feel and they both work great for that. I also feel better having a dedicated cleaning bar for the wheels (just like I do with my car washing stuff). I definitely wouldn't want to spend $50 on a Nanoskin for the car and $50 on one for the wheels or use one for both applications. But my cleaning is definitely light cleaning so my car might not be dirty enough to notice any difference between the two.
 

RAYJAY

WHO ME ?
Joined
Apr 13, 2005
Messages
1,608
Reaction score
338
Location
UNION DALE PA
I've used them both and still use Clay over the Nanoskin. The reason I choose clay is because they both do the same job for what's on my car (both completely remove everything) and a kit with 2 clay bars is $15 vs $50 for the wash mitt. I don't see the purpose for paying nearly 4x as much for something that performs the same. I don't have massive pollen or tree sap because my car is garage kept. I clean off break dust, road grime, and minor junk that accumulates and gives the surface a rough feel and they both work great for that. I also feel better having a dedicated cleaning bar for the wheels (just like I do with my car washing stuff). I definitely wouldn't want to spend $50 on a Nanoskin for the car and $50 on one for the wheels or use one for both applications. But my cleaning is definitely light cleaning so my car might not be dirty enough to notice any difference between the two.


with the clay bars you have to keep spending the $15 every time you clay, and if you drop the clay bar your done, its trash , every 6 months i will clay 3 to 4 cars the nano is a lot cheaper and for the wheels i never clay them no need use iron off and buff them with a orange pad
 

SilverSH0

SHO Member
Joined
Nov 17, 2015
Messages
896
Reaction score
828
with the clay bars you have to keep spending the $15 every time you clay, and if you drop the clay bar your done, its trash , every 6 months i will clay 3 to 4 cars the nano is a lot cheaper and for the wheels i never clay them no need use iron off and buff them with a orange pad
A couple things, if you're buying two new kits of clay (it's $15 for 2 bars) every time you do a vehicle you're doing something wrong. Most people will cut them in half and then use that half multiple times (not just once). Even claying 6-8 cars a year that should last a couple years because you can put them in a plastic bag to keep them good. I can buy 4 kits worth of clay (that's 8 clay bars) for the price of one nano mitt. It's good that you buff your wheels with an orange pad. So that means you've spent $50 on a nanomitt and $400 on a DA to get the car detailed. One could also go the route of spending $100 on 2 nanomitts. Both options seemsto be substantially more than $15 for a couple pieces of clay which comes with everything you need.

I'm not saying the nanomitt is worse than clay. I'm simply saying that what I do is pretty light and clay is cheaper and gives the exact same results. For someone like the OP who doesn't have a ton of detailing equipment it's likely cheaper for him as well. If he's not working on getting through heavy contamination, it will likely give him the same results for cheaper. It's not an attack on the nanomitt, just saying if you can get the same results for cheaper then it makes sense to go the cheaper route.
 

RAYJAY

WHO ME ?
Joined
Apr 13, 2005
Messages
1,608
Reaction score
338
Location
UNION DALE PA

RAYJAY

WHO ME ?
Joined
Apr 13, 2005
Messages
1,608
Reaction score
338
Location
UNION DALE PA
and b
A couple things, if you're buying two new kits of clay (it's $15 for 2 bars) every time you do a vehicle you're doing something wrong. Most people will cut them in half and then use that half multiple times (not just once). Even claying 6-8 cars a year that should last a couple years because you can put them in a plastic bag to keep them good. I can buy 4 kits worth of clay (that's 8 clay bars) for the price of one nano mitt. It's good that you buff your wheels with an orange pad. So that means you've spent $50 on a nanomitt and $400 on a DA to get the car detailed. One could also go the route of spending $100 on 2 nanomitts. Both options seemsto be substantially more than $15 for a couple pieces of clay which comes with everything you need.

I'm not saying the nanomitt is worse than clay. I'm simply saying that what I do is pretty light and clay is cheaper and gives the exact same results. For someone like the OP who doesn't have a ton of detailing equipment it's likely cheaper for him as well. If he's not working on getting through heavy contamination, it will likely give him the same results for cheaper. It's not an attack on the nanomitt, just saying if you can get the same results for cheaper then it makes sense to go the cheaper route.


and if your compairing clay to nanoskin lets try the apples to apples $18.00 for 2 pack sponges on amazon

https://www.amazon.com/Nanoskin-Aut...&qid=1495949236&sr=8-8&keywords=nanoskin+mitt
 

2011TAURUSSEL

2014 SHO LMS Stage 1 V10
Joined
Jun 16, 2013
Messages
916
Reaction score
510
Location
DFW Metroplex, USA
I but my clay bar in thirds that way I get three times the use and if it does fall on the ground I am only out 1/3rd of the bar. Also keep very well lubricated trust me there is no such thing as too much **** for clay bar. Move slowly and keep the **** ahead and behind the path.
 

RAYJAY

WHO ME ?
Joined
Apr 13, 2005
Messages
1,608
Reaction score
338
Location
UNION DALE PA
I but my clay bar in thirds that way I get three times the use and if it does fall on the ground I am only out 1/3rd of the bar. Also keep very well lubricated trust me there is no such thing as too much **** for clay bar. Move slowly and keep the **** ahead and behind the path.


Nanoskin it takes me max time about 10 min to do the whole car, longer to wipe off **** than nano, and yes i have used clay in the past and will never go back, used to buy it by the pound containers from poorboy's with the clay your folding over the dirt/rail dust into the clay, the nano your washing it off

to me the nanoskin is 10 time better than clay , easiest way i can say this is......... 1980 bag phone or a smart phone we have today ........ ??????? detailing the car this week for all ford.

last picture is the way i used to buy clay..... even had to dust the can off lol



20170530 004831 20170530 004848 20170530 004918 20170530 005012
 

Forum statistics

Threads
107,294
Messages
1,183,263
Members
16,132
Latest member
shoster207

Members online

Back
Top