silver_sho
New Member
Which rear control arms are the ones for the SHO?? I'm thinking the 93-02 F Body? Thanks.
BMRs installed /little paint work
- Thread starter RAYJAY
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
RAYJAY
WHO ME ?
silver_sho said:
i used the w-body's ones . part #tca012 also ask when ordering for the 12mm bushings they come with 14 mm bushing
jeff
N3FOL
New Member
BMR Control Arms
Excellent Job. I am sure that you will feel the difference with your suspension mods. I also have the BMR arms and I am glad that I have them on my car. Not to mention alignment will be perfect.
Excellent Job. I am sure that you will feel the difference with your suspension mods. I also have the BMR arms and I am glad that I have them on my car. Not to mention alignment will be perfect.
RAYJAY
WHO ME ?
N3FOL said:Excellent Job. I am sure that you will feel the difference with your suspension mods. I also have the BMR arms and I am glad that I have them on my car. Not to mention alignment will be perfect.
the guy that did my alignment loved them
where in Pa are you ??jeff
somedude_001
SHO Member
do you keep the stock H brace any modifications need to be made to make things fit or is this pretty much a bolt up thing?
RAYJAY
WHO ME ?
pretty muckh a bolt up thing as long as you get trhe 12 mm bushing from them or i think shi nut has a kit for mounting them or the GM arms i just spaced out mine with 1/2 fender washers and reg 1/2 inch washers from home depot.the only hard part was i had one of the cams frozen to the bolt on the factory arms ended up cutting the bolt out of the box I'm going to buld a h brace this winter for the box
Jeff
Jeff
