B00C5 passenger seat position sensor, need help

[Laser411]

Hi all,

I recently repaired the harness for my passenger seat when I found a burnt connector for my heated/cooled seats. I bought a new connector and repinned the connector. Now I have a B00C5 code with the airbag light on, says "Passenger Seat Track Position Restraints Sensor Circuit Open". I cannot for the life of me find this sensor or find it in the wiring diagram and desperately need guidance.

Anyone know what pin that would be on or can point me in the right direction? 2013 SHO, non-pp.

 

[kryptto]

See attached - also the filter on the seat motor for the air or heat - has a newer design WITHOUT the filter media, its been known to cause the blower to overheat.

https://www.amazon.com/dp/B01G5TBCBA?psc=1&ref=ppx_yo2ov_dt_b_product_details

 

[Texas Marauder]

Looks like it's on the bottom of the inboard seat track.

 

[Laser411]

So I re-pinned the large 20ish pin connector, do you have info on what color wire and/or which pin it should be?

 

[Texas Marauder]

This is from the 2014 manual. 2013 is probably the same. I believe C3382 is the connector you are working with. Pin 5 is the ground to the sensor, Pin 34 is the signal.

 

[Laser411]

Sorry, it was the 12 pin to the climate module that I re-pinned, so I apparently didn't really do anything with that circuit. I did remove the seat though, which disconnects C3382. Thank you for that, that should help me get close to the issue.