60k Service Question

[BigSHO43213]

Hey Guys
I'm getting ready to do my 1st 60K service to my 91 SHO. It has never had one and has 147500 miles on it and I'm not real sure what to adjust, fix or replace or what to look for to see if something needs replaced. Could someone help me out by suggestions and a ball park figure on how much this is going to run me.
Thanks
Terry G. shoot burn_out burn_out shoot

 

[Slo-Sho]

www.shotimes.com all the info you'll need.

 

[sdpatt]

Terry,

Here is a list for what you should consider servicing or replacing.

I. Top End Engine Work

1) Valve gap check/adjustment
...around $400 labor + about $3 a shim
2) Spark plugs, 6 required
...Motorcraft AGSP32PP, FordPartsNetwork.com (FPN) $3.99 ea.
3) Plug wires
...3.0L Motorcraft WR-4033, FPN $83.99 (will fit the 3.2L)
4) Valve cover & plug well seals
...Fel-Pro VS50378R, AutoZone.com $71.99 or RockAuto.com $83.98
5) Intake manifold gaskets, 2 required (if desired, not usually required)
...Motorcraft E9DZ-9439-A, FordPartsOnline.com $12.14 or FordPartsNetwork.com $12.49
6) Thermostat (only if needed)
...Motorcraft RT-1112, FPN $19.99 or FordPartsOnline.com $17.77
7) Oxygen sensors, 2 required (recommend replacement with spark plugs)
...3.0L Bosch 13942, AutoZone $33.99 ea.

II. Front End Engine Work
1) Timing belt
...3.0L (& 3.2L) Gates T248, RockAuto.com $32.81
2) Accessory belt(s)
...PS-WP, Gates K040500, RockAuto.com $10.48
...A/C-Alt, Gates K060445, RockAuto.com $11.41
3) Water Pump (rebuilt-lifetime warranty)
...A1 Cardone 57-1373, O’Reilly Auto Parts $61.45
4) Water pump gasket set (O-rings) (if desired, not usually required)
...Fel-Pro ES70425, RockAuto.com $5.32
5) Lower radiator hose (if desired, not usually required)
...Motorcraft, FordPartsOnline.com $12.87
6) Crankshaft position sensor
...Wells SU242, AutoZone/AutoZone.com $42.99, or
...Borg-Warner CSS54, O’Reilly $56.29
7) Front main oil seal
...National 710220, O’Reilly $7.99

 

[ISHOU]

Get Mark Nunnallys video about this. It can be bought through SHONUT for around $25. It does an excellant job of explaining the procedure. Also, rent your shims through SHONUT as well. It only cost $60 excluding deposit. Great service as well. I bought the tools from OTC for $40. They are not included in the shim rental kit from SHONUT but can be purchased from SHONUT, but will cost a little more.