Search results

  1. TYSHO

    Wheel Bearing?

    Go out and check your e-brake cable, most likely it's close to the wheel and rubbing up against it when turning. I had this problem a few years back and only found out when the cable snapped in half.
  2. TYSHO

    Help Badly Needed. Stupid Crank Bolt

    That's exactly what I was thinking!
  3. TYSHO

    Help Badly Needed. Stupid Crank Bolt

    That's why I posted the info on here because it will work, point blank. I was working on said Camry and noticed how the bolt looked identical in size, so I walked inside and installed it on my spare SHO engine. The only difference is that the SHO bolt has a flange, whereas the Camry has a washer...
  4. TYSHO

    Help Badly Needed. Stupid Crank Bolt

    I don't know but I am 100% positive a crank bolt from a 1999 Toyota Camry, 4 cylinder engine will fit properly.
  5. TYSHO

    93 Surge at part throttle

    Have you checked your fuel pressure? It can be a weak pump needing replacement.
  6. TYSHO

    '95 ATX "jump/thunk" into 2nd gear when cold?

    I bought an ATX that had this problem. I changed the fluid and filter [cheaper than jumping straight to a rebuild] and the problem went away, putting at least 50k miles on the transmission before I sold the SHO.
  7. TYSHO

    sometime car won't start for 10 minutes

    Do you hear your fuel pump coming on? If not, bang on the CCRM. It sounds like the relay is sticking, keeping the power from reaching the fuel pump.
  8. TYSHO

    Replacing my '95 ATX Y-Pipe or hollowing out catalytic converters?

    I had my cats removed and replaced with straight pipes for $40 out the door.
  9. TYSHO

    Rare SHO Parts Brand New, Solid ATX MM's, Welded Differentials, & More!!!

    LOL... that thing is brand new! You requested a 90-91 Hard Button, those come with the yellow cage just like the picture shows in the ad. I didn't steal a black cage from it and send you a yellow cage! :nut: I'm glad everything went smooth in delivery. :thumb:
  10. TYSHO

    Replacing my '95 ATX Y-Pipe or hollowing out catalytic converters?

    I don't think so, we're talking about an Arizona vehicle. I'm from Texas, and it cost $5 to fix a leaking hole in my exhaust pipe. I've even had a seperate occasion where my resonator weld broke away from the rear exhaust system completely, costing $15 to weld back together. It then cost $10 to...
  11. TYSHO

    Replacing my '95 ATX Y-Pipe or hollowing out catalytic converters?

    What kind of leaking and noises are you speaking of? A muffler/exhaust shop can seal the y-pipe with a couple spot welds. This will be the cheapest option, while retaining the function of the y-pipe. You might need to pull the y-pipe to hit it with the welder, depending where the leak is...
  12. TYSHO

    Fuel Delivery (or lack thereof)

    I've made quite a few post relating to the fuel system powering, as of lately. If you're not receiving any type of clicking from the CCRM, you most likely are not getting any power to the CCRM. This will most likely be a PCM problem, but you can pull out your tester and check the wires...
  13. TYSHO

    Need help ASAP! (in indiana)

    There's a book called Chiltons, it can show you everything....
  14. TYSHO

    Fluid Flushing Time!

    I think you are a little too over paranoid about the situation of putting tap water in the cooling system. One of the reasons you have coolant is to protect the system from rust and corrosion. In order to corrode a system, it has to be neglected where the coolant is non-effective from being too...
  15. TYSHO

    Running Rich!

    As pointed out, check the fuel vapor system then pull the hose off the fuel pressure regulator to make sure it's not malfunctioning. If it's malfunctioning, the regulater will leak fuel with the hose removed. This type of leak will dump extra fuel through the intake.
  16. TYSHO

    Fluid Flushing Time!

    Yes, this is why you pour the whole coolant bottle in without adding water because the engine is already holding the water needed. This of course, if you perform the flush of the system. It doesn't matter how it's mixed, it doesn't require to be mixed before pouring into the system. You are...
  17. TYSHO

    Fluid Flushing Time!

    A flush is highly recommended so you can flush all of the old crap out of the system, cleaning the system and making it more effective. It is more important than just draining what you can and adding a specific ratio of coolant to water. You will leave the radiator cap off [this is where you...
  18. TYSHO

    HELP--sho wont start

    Do you have gas? :p It sounds like you have a faulty CCRM or an IAC sensor disconnected. What's happening with the "doesn't start back up"? Do you hear the fuel pump coming on when you turn the key to the run position? Is the engine catching, then stalling out instantly, or just doesn't start?
  19. TYSHO

    Rare SHO Parts Brand New, Solid ATX MM's, Welded Differentials, & More!!!

    New Add: NOS 90-91 EATC unit with the smaller, soft buttons that came factory! :)
  20. TYSHO

    Where's the IRCM?

    Your temp guage sensor is bad or disconnected. It's located right under the coil pack, on the engine. It has a threaded nipple sticking out, where the L-shape rubber boot connector slides onto.

Latest posts

Forum statistics

Threads
106,849
Messages
1,178,647
Members
15,924
Latest member
deaglebingo

Members online

Total: 754 (members: 1, guests: 753)

Share this page

Back
Top