Search results

  1. J

    2015 SHO Non PP replace wheel hub.

    When replacing the front hub assembly, do I need to buy wheel hub assemblies with the abs speed sensor built in or can I buy them without and they are able to be swap out with the old speed sensor. I’ve seen very few that sell it built in and many that don’t have it included…what should I buy or...
  2. J

    Air not coming out of 4 front vents

    2015 Ford Taurus Sho…air will not come out of the four front vents nor the floor vents under the dash. Air conditioning works fine and so does heat. When selecting the air flow for dash to floor nothing keeps blowing out the defrost same when just floor vent selected and same when just vents...
  3. J

    Greasing/Lubing Automatic Raising/Declining Steering Column

    Will do
  4. J

    Greasing/Lubing Automatic Raising/Declining Steering Column

    That’s genius
  5. J

    Greasing/Lubing Automatic Raising/Declining Steering Column

    I would assume it would lose its telescopic function if it is stripped right?? Like it won’t go up and down when going into accessory mode or staying the car/turning it off??
  6. J

    Greasing/Lubing Automatic Raising/Declining Steering Column

    Thank you oh so very much kryptto. This helps immensely. I forgot about ALLDATA. I used to use this back in the day. I will use this for sure. You are the man.
  7. J

    Greasing/Lubing Automatic Raising/Declining Steering Column

    2015 Ford Taurus SHO, how does one ****/grease the automatic raising/declining steering column when you start the car or turn it off, it makes a noise like it needs lubed since it hasn't been lubed in 8 years. Anyone know if it is accessible or how to do this????
  8. J

    Telescopic steering wheel creaking

    When I start my car and the telescopic steering wheel automatically moves up to my memorized position it makes a noise like it needs ****. It’s not creaking but it’s the only way I can reference it. Is there any way to grease or **** it?? It’s not the shaft it just as it expands and recedes when...
  9. J

    Quickstruts for Front End

    Yeah, to **** with that compressor spring. Not worth the hassle or chance of getting injured if that thing flies off or is broke regardless. I’ve seen it mess someone up pretty decent in a garage I worked in as a **** tech one upon a time. Thing spring up and hit him in the shoulder and low jaw...
  10. J

    Quickstruts for Front End

    I just bought mine last week and they are going on in two days. Hopefully I’ll have a week or two to test them and also hope they won’t be defective. Appreciate the honesty and heads up man as I bought off rock auto too.
  11. J

    Quickstruts for Front End

    Damn, amazing how expensive shit gets. I like you buy myself and then try to replace them myself. I am lucky to have someone who has a lift/tools I can use even though I have most tools myself. It does get expensive. I will replace the stuff I feel it needs and then go from there. Yes you are...
  12. J

    Quickstruts for Front End

    How deep money wise were you into all that Doug??
  13. J

    Quickstruts for Front End

    When you say bearing are you referring to the one on the top of the strut mount or the wheel bearing?? Also, did you run into something with that??
  14. J

    Quickstruts for Front End

    I am looking at replacing my front struts in the front end of my car. I am looking to do quickstruts due to time constraints and quickness. I am looking at FCS or Monroe, cant seem to find KYB anywhere that are quick-struts. I do not do anything fancy or performance wise for my car and I just...
  15. J

    Lower A-Arm Replacement/Ball Joint Replacement

    As far as that noise goes I am not sure what that noise would be. I dont have a noise but I can tell mine is due to a suspension problem. I took my passenger side wheel off and then i noticed the inside of my tire was wearing quicker than any other part of it and I checked the tire I cross...
  16. J

    Lower A-Arm Replacement/Ball Joint Replacement

    I will agree it is trial and error and I am particular about working on cars because lord knows what you can mess up if you dont know what you are doing or you push or pull to hard. I really hope it is just my balljoint and nothing else and luckily ive been through this before with the same...
  17. J

    Lower A-Arm Replacement/Ball Joint Replacement

    Thanks for that Kevin. Ive not had a clunking noise all the time but ive noticed when i hit a bump or anything like it, it makes a noise. Sorry to hear that shit keeps happening with that clunking. You spend all that money and shit aint right or working. Also Ive repaced ball joints before and...
  18. J

    Lower A-Arm Replacement/Ball Joint Replacement

    For me it is more of a clunk or thud like when i had my 11 SHO and I thought it was a ball joint and it was when the garage looked at it and this sounds exactly the same. For me I dont have a rattle. Id guess with your rattle something is loose or broken that absorbs vibration.
  19. J

    Lower A-Arm Replacement/Ball Joint Replacement

    Care to share how you did it jasong?? A little bit of insight??
  20. J

    Lower A-Arm Replacement/Ball Joint Replacement

    On my SHO (2015), I have the dreaded, you hit a bump you hear the metal clunking or clicking sound when you hit a bump. Such as driving over a raised curb lip when turning into business driveways, a small bump or small *** hole in the road, going over train tracks(this is where you really...

Latest posts

Forum statistics

Threads
106,738
Messages
1,177,262
Members
15,840
Latest member
pestcontrolperth

Members online

No members online now.
Total: 119 (members: 0, guests: 119)

Share this page

Back
Top