Search results

  1. S

    2013 3.5 twin turbo awd

    If we ban everyone that makes an error, there is no one left... ;) For general information, there was a NASA study on fail modes in vehicles ages ago and it found that something like 98% of all fails ended up being caused by electrical connections in one way or another. Interesting, eh. smn
  2. S

    Tires for 2016 SHO

    Well, as long as you keep it slow in the curves and are careful in the rain, it could all be fine. But from a performance standpoint, Ron is on target. And this is still really the wrong place for this thread. If you want more data from those with Gen IVs, you might want to restart it over...
  3. S

    97 SHO Making A New Noise

    I agree with the above. Sounds like an idler or such. The welds on the cam would have to be really, really bad to let go in a couple of years, and I think the sound would be different. smn
  4. S

    After Market head Gaskets

    Someone that has looked into this more recently should come by and chime in soon, but IIRC these have been pretty difficult to find for some time now, and your best bet if you want something not from a salvage yard is to get some gasket material and cut out one to the pattern of the old one you...
  5. S

    Maintenance for muffler (?)

    I agree, it would be simplest to just pick up a cat of about the same size with the same in and out sizes. If you get desperate, let me know. I think I have a spare brand new one in my parts collection that is even the correct replacement part number that I picked up when I redid the exhaust...
  6. S

    Maintenance for muffler (?)

    Ron might still remember were the dyno data is at. I remember if from long ago also, but not the site. I think there were a number of runs each under several configurations. ShoTimes FAQ, maybe. But the results pretty clearly established that deleting the 3rd cat had negative results in...
  7. S

    Maintenance for muffler (?)

    The problem is it is a truly mixed bag. Some things have gotten just hugely better in my lifetime. In ways I thought would never occur. Others have deteriorated to a point where a rational outside observer would say our society is going insane. In the end, you cannot let it get to you...
  8. S

    Maintenance for muffler (?)

    The originals were very strongly constructed and of good materials. I suspect most people that have replaced theirs did so with the idea of changing the exhaust sound more than the need to do so due to failure of the factory muffler.
  9. S

    2013 3.5 twin turbo awd

    Yes. Best of luck finding a solution to your problem. smn
  10. S

    2013 3.5 twin turbo awd

    I think you have this in the wrong section. This is Gen III. You have a Gen IV. You might want to repost it in the correct location if you want answers from those with more appropriate backgrounds. smn
  11. S

    Possibles causes for an intermittent P0411 code (?)

    IIRC the point of the air injection pump is to more rapidly heat up the catalytic converters. Running fuel rich produces a cooler exhaust, not a hotter one, so yes, if the air pump is out of spec, you could be getting excess fuel in the exhaust. Again, I have not looked this up, but on memory...
  12. S

    Coolant flush

    Not to worry. It really does not need to be deleted, now that others have responded. smn
  13. S

    Cam noise?

    Other things might be causing the noise, but if the cams are not welded, at that mileage there is a good chance the cam sprockets are starting to slip. Disassembly, repositioning correctly, and then welding are really the only solutions for this. smn
  14. S

    No 4th Gear

    Small? ;) smn
  15. S

    No 4th Gear

    I think a complete wiring check is the next thing to do. After that, I am not sure where you go. Anyone? smn
  16. S

    SoCal Find

    Unless someone backed into it in a driveway. smn
  17. S

    No stsrt

    You might check over in V8sho.com for how to reset the anti theft system. https://www.v8sho.com/SHO/96shohome.html smn
  18. S

    Can weld

    Though cam sprocket welding requires caution, any good welder aware that the cams are hollow should be able to do it for you. Its simply not that difficult. If you look around here: https://www.v8sho.com/SHO/96shohome.html you should be able to find both descriptive material and photos of...
  19. S

    FIND - Super Clean 96 SHO with 2k miles

    But they are laughter wrinkles... ;) smn
  20. S

    What should I keep?

    I think everyone made excellent points. As you can see, its an extensive list. If it were me, I would find a place to store the dead car and just keep it as a potential parts bin, to be scrounged from when required. smn

Latest posts

Forum statistics

Threads
107,123
Messages
1,181,642
Members
16,173
Latest member
Nomospm

Members online

No members online now.
Total: 1,019 (members: 0, guests: 1,019)

Share this page

Back
Top