-
-
Ssparris replied to the thread SHOkart - Low pressure fuel pump specs.I have found that others doing ecoboost swaps have installed the regulator and return at the tank, creating a return less system from...
-
Ssparris replied to the thread SHOkart - Low pressure fuel pump specs.I was hoping that delivering a constant flow of fuel at a given psi would satisfy the requirements of the HPFP, returning left over fuel...
-
Ssparris replied to the thread SHOkart - Low pressure fuel pump specs.I am building a tube chassis mid engine car using the engine from a 2010 SHO. Also, it appears that there is a return line going back to...
-
Ssparris replied to the thread SHOkart - Low pressure fuel pump specs.I am looking at a 15 gallon aluminum fuel cell with foam. Also a 200lph/52gph at 75psi fuel pump and pressure regulator. I would be...
-
Ssparris reacted to Texas Marauder's post in the thread Need ptu mounting bolts torque spec with
Like.
-
SInfo from 3rd post here https://www.ecoboostperformanceforum.com/index.php?topic=6059.0 2013's have a different LPFP than the...
-
Ssparris posted the thread SHOkart - Low pressure fuel pump specs in Generation 4 - Maintenance & Troubleshooting.I am going to installing a fuel cell with external fuel pump...can someone please share the specs on the low pressure fuel pump...ex...
-
Ssparris posted the thread Need ptu mounting bolts torque spec in Generation 4 - Maintenance & Troubleshooting.Can't seem to find the torque spec for the ptu mounting bolts. Anyone have the info?
-
Ssparris replied to the thread Tube Chassis Project - Engine in Rear.Been busy this last week. Did the timing chains and tensioner along with the water pump The motor had an oil leak from the valve...
-
-
Ssparris replied to the thread Tube chassis build-brakes.Bump
-
Ssparris replied to the thread Tube Chassis Project - Engine in Rear.While I have the engine on the stand, I am doing valve cover gaskets and plugs. What else should I do while I have easy access?
-
Ssparris posted the thread Tube chassis build-brakes in Generation 4 - Maintenance & Troubleshooting.I was working on my front brakes calipers today and noticed they were stamped FoMoCo and Roush. Quick search did not show Roush calipers...
-
Ssparris posted the thread Tube Chassis Project - Engine in Rear in Generation 4 - Maintenance & Troubleshooting.I am currently building a tube chassis mid engine two seater, using the SHO engine and transmission placed in the rear with the...
-
Ssparris replied to the thread New guy, new build.Absolutely....also installing a PTU drain plug. I see that you upgraded your Trans cooler....Did you bypass the factory cooler? If so...
-
-
Loading…
-
Loading…
