-
-
PI would get a good used one. Not sure how close it can get by manually trying to get it back to original roundness.
-
Ppsix replied to the thread Won't start after replacing timing belt.this is ****, I installed a new crankshaft sensor on the original bolts, and I see that the plate that goes between the sensor is bent...
-
Ppsix reacted to Texas Marauder's post in the thread Won't start after replacing timing belt with
Like.
I'm pretty sure the screws are stainless because they are non magnetic. However some stainless is magnetic so make sure you get non... -
Ppsix replied to the thread Won't start after replacing timing belt.I broke the second sensor, congratulations. I love this car. As soon as I find a sensor with bolts, I'll try to move the camshaft 180...
-
Pread through this post, they use stainless steel screws for a reason so you will need to find replacements in order to work properly...
-
Ppsix replied to the thread Won't start after replacing timing belt.The bolts I already have are not original, the original ones have mysteriously disappeared. Perhaps because of this, the sensor is...
-
Ppsix replied to the thread Won't start after replacing timing belt.there is no start, the spark is gone and the tachometer does not work. The fuel pump works.
-
Ppsix replied to the thread Won't start after replacing timing belt.I installed the old sensor, there was a spark on it and the tachometer worked, tightened the two bolts and checked that it was level. In...
-
PThere are two screws so it doesn't move, I don't know if you can get away with just one without running into issues sooner or later...
-
Ppsix replied to the thread Won't start after replacing timing belt.
-
-
Ppsix replied to the thread Won't start after replacing timing belt.yeah, you were right. shit
-
Ppsix replied to the thread Won't start after replacing timing belt.module that distributes to coils.
-
Ppsix replied to the thread Won't start after replacing timing belt.I have it on one screw, but it’s original. I checked the ground and the power that goes to the sensor, everything is there. I'm checking...
-
Ppsix replied to the thread Won't start after replacing timing belt.Do you think the crankshaft sensor could suddenly fly off? Wires?
-
Ppsix replied to the thread Won't start after replacing timing belt.Along with the tachometer, the spark also disappeared
-
-
Loading…
-
Loading…
