Dannyboy puckett
Latest activity Postings About
-
-
Dannyboy puckett posted the thread Clutch cable broke/stretched in Gen 1 & 2 - Engine, Exhaust, Drive Line & AC syste.95 sho mtx. Driving it hard,went for third and heard a little noise.i thought it was a small rock hitting under car.it wasn't that loud...
-
Dannyboy puckett replied to the thread Eliminating hose from valve cover to intake.Ok.thank you.
-
Dannyboy puckett reacted to Irish Pride's post in the thread Eliminating hose from valve cover to intake with
Like.
You can cap the port on the intake but do not cap the port on the valve cover. The port on the valve cover is for positive air flow in... -
204089069184498221 July 3rd 2022 -Chad
-
Dannyboy puckett posted the thread Eliminating hose from valve cover to intake in Gen 1 & 2 - Engine, Exhaust, Drive Line & AC syste.So I seen this post where this guy eliminated his hose from valve cover to intake.people said don't cap valve cover side,instead use a...
-
-
Dannyboy puckett replied to the thread Auto-RX & me.Oh ok.thanks.
-
Please don't revive 10 year old threads, start a new one. If you look on bitog, you will see very good test results with Supertech oil...
-
Dannyboy puckett replied to the thread Auto-RX & me.I know this is a super old thread, but I have to know if you have factual proof on the supertech brand being the same as quaker...
-
Correct.
-
Dannyboy puckett replied to the thread 1995 SHO MTX stumble at start.So basically you physically remove the purge valve,and disconnect the electrical connector? And that is it? Im confused on this, because...
-
Its been a long time since I did that, but I think I just removed the purge valve so the intake vacuum is always purging the canister.
-
Dannyboy puckett replied to the thread 1995 SHO MTX stumble at start.I know this is an old post.sorry to revive this,but I'm experiencing the fuel smell under hood all the time after parking it. I don't...
-
Typically, the only issue with the charcoal canister is that it can get saturated if the purge valve never opens. There was an issue...
-
Dannyboy puckett reacted to luigisho's post in the thread Tachometer problems? What rpm at 60mph with Like.
I agree. I think that is probably good. The rpms don't always look right in 5th but they are that high.
-
Dannyboy puckett reacted to Greg Corcoran's post in the thread Tachometer problems? What rpm at 60mph with Like.
My '95 is closer to 2300 -2400 rpm, so I think you're fine. Remember these are not calibrated instruments.
-
-
Loading…
-
Loading…
