802SHO's latest activity
-
802SHO replied to the thread 802SHO 2010 Build.Need to order a 180 thermostat bc my cooler works really well. If I get the 165 it’ll drop me to 140 in no time -
802SHO replied to the thread 802SHO 2010 Build.Exactly. I’ve been using my service manual. The issue is very clear. My current transmission thermostat is acting like it’s stuck open...
-
Not sure where you get that. Per the Ford manual: Connect the scan tool and check the Transmission Fluid Temperature (TFT). The...
-
802SHO replied to the thread 802SHO 2010 Build.I’m going to try to remove the hardlines and cut them here. And convert to this guy
-
-
802SHO replied to the thread Flex plate mounting direction.Can’t say that I have. You measured the thickness and it’s thicker?
-
802SHO replied to the thread 802SHO 2010 Build.At 140 this was where I’m at on the dipstick so once I get to 180 it’ll be interesting. May need to take some out. Btw it’s really...
-
-
802SHO replied to the thread 802SHO 2010 Build.Alright, picking right back up where I left off. First a random couple pics of some cool Purple PPF I bought that I changed the turbo...
-
-
-
802SHO replied to the thread 802SHO 2010 Build.Ready for some drive testing a little later today. Hope this shudder is cleared up. I’m thoroughly enjoying wiring now. I started on...
-
-
802SHO replied to the thread Flex plate mounting direction.Sorry for the confusion it’s much easier to see here which side is which. This was @bpd1151 photo of the original 1st one (white...
-
-
802SHO replied to the thread Flex plate mounting direction.Unless those bolt holes are recessed on both sides? From certainty to confused lol.
-
802SHO replied to the thread Flex plate mounting direction.Yours is not labeled? The dead giveaway is the recessed bolt holes for the TC bolts. That’s what I noticed in your pic, recessed bolt...
-
-
802SHO replied to the thread Flex plate mounting direction.I had to turn down new oem TC bolts and a 17 mm socket. You see the socket scuffing marks on the face of the flexplate? The oem TC...
-
802SHO replied to the thread Flex plate mounting direction.That appears incorrect. The counter sink TC bolt holes should be facing towards the engine not away from it. Here’s mine on the engine...
-
-
802SHO replied to the thread 802SHO 2010 Build.That’s been the bigger pattern with this car: the right answer keeps showing up after measurement, not after guessing. We got two 3.5L...
-
