So what did you do to your SHO today!?

M.J

Member
Joined
Mar 15, 2017
Messages
14
Reaction score
34
Not really today but over the weekend.
Got carried away with some fancy stickers.
You must be registered for see images attach

Made a bracket.
You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

Bracket was made to support all this extra stuff. Yes it clears everything when mounted, somehow. Never really liked the idea of all this being mounted in the front bumper or using the washer fluid tank as my car is daily driven and I almost always use my washer fluid. Battery will be relocated to trunk w/ custom pos/neg terminals where old battery was.
 

802SHO

Built not Bought
Joined
Oct 8, 2019
Messages
1,478
Reaction score
2,600
Location
Essex Junction Vermont
very cool, I love how clean you wrapped everything with the gold tape! I hope the orientation of the pump being on its side doesn’t cause any issues. I thought pumps needed to be vertical and upside down?

When I used my WW reservoir for meth I swapped the pump and low level sensor onto a smaller tank and still was able to use WW fluid. There’s a How To write up on it somewhere.

Clean install and let us know how it goes.
 

GotGrip?

Conversation Ruiner
Joined
Jan 21, 2019
Messages
854
Reaction score
1,402
Location
Minnesota
very cool, I love how clean you wrapped everything with the gold tape! I hope the orientation of the pump being on its side doesn’t cause any issues. I thought pumps needed to be vertical and upside down?

When I used my WW reservoir for meth I swapped the pump and low level sensor onto a smaller tank and still was able to use WW fluid. There’s a How To write up on it somewhere.

Clean install and let us know how it goes.
The install guide for the SNO pump (they are all the same really) can be mounted in any fashion, upside down, sideways whatever as long as the flow lines were followed.
 

Jordan_R

Stock Block Ready To Knock...er..Rock
Joined
Sep 20, 2017
Messages
1,446
Reaction score
3,218
Location
Missouri
You must be registered for see images attach

Made some ramps and loaded up the SHO! I’m taking her over to GHT this afternoon for a dyno pull. My last dyno pull resulted in 489whp, I’m curious where she is at now!
You must be registered for see images attach


That truck looks familiar..
 

Bluezone

Tailgaters will be prosecuted.
Joined
Jul 30, 2020
Messages
260
Reaction score
226
Location
Ont, Canada
Made a last minute decision to head to the track today. No weight reductions just the spare missing and half tank of gas. With me sitting in the car probably 4620#.
Updated Gearhead tuning for EVO HFPF and Gearhead intercooler. Nice improvements but still need to make some changes.
Red lighted on first run Trying to compensate for cold tires. Third one was with hot tires.
 

Attachments

  • IMG_20210802_162158.jpg
    IMG_20210802_162158.jpg
    205 KB · Views: 24

Jordan_R

Stock Block Ready To Knock...er..Rock
Joined
Sep 20, 2017
Messages
1,446
Reaction score
3,218
Location
Missouri
Made a last minute decision to head to the track today. No weight reductions just the spare missing and half tank of gas. With me sitting in the car probably 4620#.
Updated Gearhead tuning for EVO HFPF and Gearhead intercooler. Nice improvements but still need to make some changes.
Red lighted on first run Trying to compensate for cold tires. Third one was with hot tires.
I feel like you should still be into the mid 12s easily with that set up. Mks definitely have a crutch compared to the sho somewhere
 

Bluezone

Tailgaters will be prosecuted.
Joined
Jul 30, 2020
Messages
260
Reaction score
226
Location
Ont, Canada
I feel like you should still be into the mid 12s easily with that set up. Mks definitely have a crutch compared to the sho somewhere
I'm a little bit faster if I turn the traction control off. Maybe .1-.15. Didn't have time to try it though. Family get together with friends later today..
The car goes in the shop tomorrow to get the PTU and the updated intermediate front wheel drive shaft replaced. Maybe it will help along with weight watchers sawzall plan. Lol.
We're sort of celebrating this weekend
GF got the all clear on her cancer treatments.
 

DadMobile

Worlds 3rd least slowest Ecoboost SHO
Joined
Nov 4, 2020
Messages
432
Reaction score
778
Location
Texas
Got the car on the dyno and the nozzle from the methanol kit started spraying methanol everywhere but the intake.
I unplugged the methanol controller and attempted second pull then I had a spark plug **** out. The car put way less than expected at 464whp due to these variables, not to mention it was 97 degrees in the shade.

My car has been capped at 500 wheel torque so that hasn’t changed. Waiting a week for the parts to get in to continue. Sorry, no saucy numbers yet.
 

Wsho

SHO Member
Joined
Nov 26, 2017
Messages
692
Reaction score
1,255
Location
Sacramento California
Not really today but over the weekend.
Got carried away with some fancy stickers.
You must be registered for see images attach

Made a bracket.
You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

Bracket was made to support all this extra stuff. Yes it clears everything when mounted, somehow. Never really liked the idea of all this being mounted in the front bumper or using the washer fluid tank as my car is daily driven and I almost always use my washer fluid. Battery will be relocated to trunk w/ custom pos/neg terminals where old battery was.
Nice... just let me know how you did your battery relocate to trunk. I did that two months ago and had trouble with the car not starting after mounting the battery box in the trunk. I did run a positive and negative wire from the trunk to the front. Very interested in how you're going to do this keep me informed..
 

SHOthyme

SHO Member
Joined
Mar 5, 2020
Messages
257
Reaction score
298
Location
MN
window tint should be your next "mod"

Ok @FoMoCoSHO you shamed me into it :) , not sure 50% was worth it but for only $200, I thought I would try it out.

I kept it legal because it keeps with the "sleeper" theme and the bigger reason being if anyone will get pulled over for tint it would be this guy.

One other thing to note, the guy with the s2000 (I could hear the whine on his SC as he pulled up) was the guy that did the tint, when he got out of the car he said... sweet car, love the wheels!

The boat got some love from the Honda guy. He thought it was new, thanks to the 2 step paint correction and ceramic, it looks real clean for an 18.


You must be registered for see images attach
 

Forum statistics

Threads
102,931
Messages
1,135,163
Members
13,010
Latest member
Jnewell

Members online

Top