Keyless entry

Discussion in 'Gen 1 & 2 - Guides (For How-to guides, NOT how-to ' started by Driver5, Jun 3, 2018.

Thread Status:
Not open for further replies.
  1. Driver5

    Driver5 New Member

    Joined:
    May 19, 2018
    Messages:
    19
    Likes Received:
    9
    Location:
    Poulsbo wa.
    I have a 93 ATX with keyless entry number pad on door. I have a 93 MDX electric door locks but no pad on door. I want to take the driver's door off of the ATX and the box out of the trunk and put it on my MTX is there going to be any problems
     
  2. zoomlater

    zoomlater SHO Member

    Joined:
    May 31, 2004
    Messages:
    1,202
    Likes Received:
    651
    Location:
    Seattle, WA
    SHOdded likes this.
  3. Driver5

    Driver5 New Member

    Joined:
    May 19, 2018
    Messages:
    19
    Likes Received:
    9
    Location:
    Poulsbo wa.
    Thank you. I searched earlier for something but no luck . Must not have worded it right. Oh well . This forum has be very helpful. I think I'm going to have to park mine till I can replace all bushings and mounts . Banging bad torque steer is really strong sometimes
     
  4. rubydist

    rubydist Moderator Staff Member

    Joined:
    Jun 25, 2007
    Messages:
    6,725
    Likes Received:
    2,513
    Location:
    Denver
    You need the wiring harness from the driver's door with the keypad (which you get if you literally swap the doors) and the wiring harness that runs from the A-pillar back to the trunk. To r/r the wiring harness, you need to remove all the trim pieces on the left side of the interior (driver's kick panel, drivers door bottom, B-pillar, rear door bottom trim) and also remove the rear seat and seat back, as I recall.
     
    SHOdded likes this.
  5. Driver5

    Driver5 New Member

    Joined:
    May 19, 2018
    Messages:
    19
    Likes Received:
    9
    Location:
    Poulsbo wa.
    Ok thank you .
     
Thread Status:
Not open for further replies.

Share This Page

If you wish to help keep SHOforum running, please click the donation button below