I made a custom set of Huge Bore Butterflies for my ported intake. The prototype for the HBB's cost me $600.00 to make. I was hoping to make a...
Well, we finally got to the bottom of my no-start SHO. It seems that the crank trigger was sheared off by the timing washer on the crankshaft...
My SHO has been sitting on my driveway for the last 2 months... I replaced the fuel pump, because it was not priming the injectors. Now it...
Couple of weeks ago my SHO would not start. I diagnosed the problem as a failed fuel pump. I could not prime the injectors when I turned the...
I do not beleive that I have owned this SHO for the last 20 years and I still like it after all the break downs and problems. My fuel pump went...
I have a rumble comming out from the left front axle. It feels like damaged ball bearings. I lifted the front end, and there is a bit of play...
I have: a 3.0 spare engine block with 105,000 miles that has been sitting in my garage for 15 years, I have turned the engine regularly and...
I just finished installing my 3rd clutch in my SHO. First installation went perfectly and the clutch lasted about 7 years with no problems. The...
I am in the process of replacing my clutch and flywheel. I have a Fidanza flywheel but the steel liner is damaged and needs to be replaced....
Finally finished several SHOrty Shifters. Price is $130.00 plus $15.00 for shipping....
Here are some photographs of the HBB I designed and made about 5 years ago. I've been running them on my car ever since. Although I am sad to...
There have ben several requests for a SHOrt Shifter Group buy, from several Forum Members, so here it is The SHOrt Shifters cost $310.00...
I am getting a 551 code "Problem in Intake Manifold Runner Control(IMRC) solenoid/circuit" Can someone identify where the solenoid circuit...
Several months ago I posted a thread about rebuilding the electric motors to lower and raise the door windows, and I got no responses. I...
I just finished installing a new Clutchmasters Organic clutch, PP, new ceramic TOB, new fork bushings, rear main seal, replaced the water hoses,...
I have to appoligize. I posted this thread on the wrong forum again. http://www.shoforum.com/showthread.php?t=98802 Jose
These are 2 more products that I manufacture to help improve shifting the MTX SHO. [IMG] Here you can see the elbow which attaches the rod...
Yesterday I began stripping the engine in order to pull it out. I decided to remove the engine instead of droppping the transmision. This...
I've had several requests for these instructions, so I guess that it might be more convenient to post them here. I plan to add some photographs...
I need the white plastic lever that actuates the locking mechanism in the driver's side door when you use the key to unlock. If anybody has a...
If you wish to help keep SHOforum running, please click the donation button below
Separate names with a comma.
