FastCAD
Latest activity Postings About
-
-
FastCAD reacted to Sammyp's post in the thread Is there a place to look for OEM cosmetic parts? with
Like.
I would not go with the Basket Weaves since they will not fit if you decide to convert the front brakes to 1996 - 11.6 inches. I... -
FastCAD replied to the thread Can find M-code CCRM.This one has been in my MTX for at least 2yrs. no problems. https://www.summitracing.com/parts/fss-37510
-
Well, the timing cover on that engine is not sealed, since it is just a cosmetic cover. So somewhere behind the timing cover something...
-
Asking which clutch kit to go with is like asking what brand oil do you use. You are going to get several different answers. I...
-
FastCAD replied to the thread Fuel pump woes - and random 3 pin connector unplugged.https://www.summitracing.com/parts/fss-37510
-
FastCAD replied to the thread Fuel pump woes - and random 3 pin connector unplugged.The 3 pin loose connector is for california cars. The fan coming on is normal and it tells you the ccrm is working. Double check your...
-
FastCAD replied to the thread 93 MTX 3.0 no spark cylinder 2 &6.agreed the codes didn't make much sense and if it's a pcm problem then it's not much help & $$$ the dis is a few $$ & make sure you get...
-
FastCAD replied to the thread 93 MTX 3.0 no spark cylinder 2 &6.a bad cam sensor will give you some of those symptoms. start the engine and while running disconnect the cam sensor if there is no...
-
FastCAD replied to the thread Can find M-code CCRM.You haven't said that you have tried to pull your codes. This should ALWAYS be done FIRST even if you have no CEL light.
-
FastCAD replied to the thread '91 SHO Parts.I still have the cladding wrapped in 6mil plastic ready to ship. $100. (8 pcs. 3 bundles). Shipping can cost more. UPS wants to box the...
-
FastCAD replied to the thread '91 SHO Parts.e-mail;[email protected]
-
FastCAD replied to the thread Electrical Draining.To much junk in the glove box will trip the light on. 12v all night will run down the charge pretty quick. Bin der dun dat.
-
FastCAD replied to the thread Can find M-code CCRM.Do you know it's your CCRM?? If so look here:https://www.summitracing.com/parts/fss-37510
-
FastCAD replied to the thread Mustang, Ranger 1991 Crank Sensor?.tapping that weep hole is a good idea. there is plenty of room behind the lower engine cover above the cps I think a small, simple...
-
FastCAD replied to the thread Airbag code 10.unplug the module and disconnect the air-bag light behind the knee plate right of the steering column and be done with it. bag will be...
-
-
Loading…
-
Loading…
