3.0 heads 3.2 block with turbo

[davekar]

i know people run turbo systems on 3.0 engines and 3.2 engines but i was wondering when you do the 3.0 heads on the 3.2 block if that gives you a higher compression ratio that wouldnt be good for turbo set ups?

 

[Twisted6]

By itself, no, does pose a tuning problem though. With higher compression, your margin for error in tuning is quite small.

 

[biker889]

No, The only diff. between the heads is a few mounting holes and a mounting boss. The intake cams are the only main variation between the 3.0-3.2 headwise.

 

[somedude_001]

No, The only diff. between the heads is a few mounting holes and a mounting boss. The intake cams are the only main variation between the 3.0-3.2 headwise.

+1. unless there is something wrong with the heads on your 3.2 just swap the intake cams from the 3.0.