Torque specs - Gen1 and Gen2

Discussion in 'Gen 1 & 2 - Guides (For How-to guides, NOT how-to ' started by 93rev2sev, Mar 11, 2008.

  1. 93rev2sev

    93rev2sev SHO Member

    Joined:
    Nov 1, 2004
    Messages:
    6,459
    Likes Received:
    1,821
    Occupation:
    Network Eng.
    Location:
    Hockeytown
    I just copied and pasted this from another thread.
    It seems like the perfect sticky candidate...


    TORQUE SPECIFICATIONS
    --------------------------------------------------------------------------------------
    | Description | N-m | Lb-Ft |
    -------------------------------------------------------------------------------------´
    | Crankshaft Pulley Bolt | 152-172 | 113-126 |
    -------------------------------------------------------------------------------------´
    | Transaxle-to-Engine Bolts | 34-47 | 25-35 |
    -------------------------------------------------------------------------------------´
    | Catalyst-to-Engine Bolts | 27-47 | 19-34 |
    -------------------------------------------------------------------------------------´
    | Oil Drain Plug | 20-33 | 15-24 |
    -------------------------------------------------------------------------------------´
    | A/C Compressor Bracket Bolts | 36-55 | 27-40 |
    -------------------------------------------------------------------------------------´
    | Alternator Retaining Bolts | 48-72 | 36-53 |
    -------------------------------------------------------------------------------------´
    | Insulator-to-Engine Bracket | 54-75 | 40-55 |
    -------------------------------------------------------------------------------------´
    | RH Front and Rear Insulator-to-Frame | 68-95 | 50-70 |
    | Nuts | | |
    -------------------------------------------------------------------------------------´
    | Roll Damper Nuts | 54-75 | 40-55 |
    -------------------------------------------------------------------------------------´
    | Engine Damper Bolts | 54-75 | 40-55 |
    -------------------------------------------------------------------------------------´
    | LH Insulator-to-Bracket Nuts | 54-75 | 40-55 |
    -------------------------------------------------------------------------------------´
    | LH Insulator-to-Transaxle | 95-130 | 70-95 |
    -------------------------------------------------------------------------------------´
    | LH Insulator-to-Frame | 81-116 | 60-85 |
    -------------------------------------------------------------------------------------´
    | RH Engine Damper-to-Engine Bracket | 28-41 | 21-30 |
    -------------------------------------------------------------------------------------´
    | RH Engine Bracket-to-Shock Tower Bolts | 54-75 | 40-55 |
    -------------------------------------------------------------------------------------´
    | LH Engine Damper Flag Nut | 28-41 | 21-30 |
    -------------------------------------------------------------------------------------´
    | Timing Belt Cover Bolts (Front) | 7-11 | 60-90 (Lb-In) |
    -------------------------------------------------------------------------------------´
    | Tension Locknut | 33-51 | 25-37 |
    -------------------------------------------------------------------------------------´
    | Water Pump Pulley Nut | 16-23 | 12-16 |
    -------------------------------------------------------------------------------------´
    | Power Steering Pump Pulley | 54-68 | 40-50 |
    -------------------------------------------------------------------------------------´
    | Wheel Lug Nuts | 115-142 | 85-105 |
    -------------------------------------------------------------------------------------´
    | Throttle Body Bolts | 16-23 | 12-16 |
    -------------------------------------------------------------------------------------´
    | Idler Pulley Nut | 34-50 | 25-36 |
    -------------------------------------------------------------------------------------´
    | Alternator/A/C Pulley and Bracket | 15-23 | 11-16 |
    | Bolts | | |
    -------------------------------------------------------------------------------------´
    | Intake Manifold Crossover Tube Nuts | 15-23 | 11-16 |
    -------------------------------------------------------------------------------------´
    | Water Pump Retaining Bolts | 16-23 | 12-16 |
    -------------------------------------------------------------------------------------´
    | Cylinder Head Cover Bolts | 9.8-16 | 8-11 |
    -------------------------------------------------------------------------------------´
    | Intake Manifold Retaining Bolts | 15-23 | 11-16 |
    -------------------------------------------------------------------------------------´
    | Intake Manifold Bracket Bolts | 15-23 | 11-16 |
    -------------------------------------------------------------------------------------´
    | Thermostat Housing Retaining Nuts | 7-11 | 5-8 |
    -------------------------------------------------------------------------------------´
    | Cylinder Head Bolts | (1) | (1) |
    -------------------------------------------------------------------------------------´
    | Upper Oil Battle Bolts | 15-23 | 11-16 |
    -------------------------------------------------------------------------------------´
    | Connecting Rod Nuts | (4) | (4) |
    -------------------------------------------------------------------------------------´
    | Oil Pump Retaining Bolts | 15-23 | 11-16 |
    -------------------------------------------------------------------------------------´
    | Oil Sump-to-Oil Pump Bolts | 7-11 | 6-8 |
    -------------------------------------------------------------------------------------´
    | Oil Pan Retaining Bolts | 15-23 | 11-16 |
    -------------------------------------------------------------------------------------´
    | EGR Valve Retaining Bolts | 15-23 | 11-16 |
    -------------------------------------------------------------------------------------´
    | Engine Coolant Temperature Sensor | 16-24 | 12-17 |
    -------------------------------------------------------------------------------------´
    | Knock Sensor | 29-39 | 22-28 |
    -------------------------------------------------------------------------------------´
    | Oil Level Sensor | 21-33 | 16-24 |
    -------------------------------------------------------------------------------------´
    | Oil Pressure Sending Switch | 16-24 | 12-17 |
    -------------------------------------------------------------------------------------´
    | Camshaft Sensor | 7-11 | 6-8 |
    -------------------------------------------------------------------------------------´
    | Crankshaft Sensor | 1.5-2.5 | 14-22 (Lb-In) |
    -------------------------------------------------------------------------------------´
    | Throttle Position Sensor | 2-3 | 18-26 (Lb-In) |
    -------------------------------------------------------------------------------------´
    | Exhaust Manifold-to-Cylinder Head | 35-52 | 26-38 |
    -------------------------------------------------------------------------------------´
    | Heat Shield Retaining Bolts | 15-23 | 11-16 |
    -------------------------------------------------------------------------------------´
    | Exhaust Pipe-to-Manifold Nuts | 21-32 | 16-24 |
    -------------------------------------------------------------------------------------´
    | Main Bearing Cap Bolts | (2) | (2) |
    -------------------------------------------------------------------------------------´
    | Main Bearing Support Beam | 21-32 | 15-24 |
    -------------------------------------------------------------------------------------´
    | Oil Seal Carrier Bolts | 6.3-9.4 | 55-82 (Lb-In) |
    -------------------------------------------------------------------------------------´
    | Oil Pick-Up Tube Bolts | 7.1-11 | 60-90 (Lb-In) |
    -------------------------------------------------------------------------------------´
    | Oil Pick-Up Tube Nuts | 21-32 | 15-24 |
    -------------------------------------------------------------------------------------´
    | Flywheel Bolts | (3) | (3) |
    -------------------------------------------------------------------------------------´
    | Pressure Plate Retaining Bolts | 16-33 | 12-24 |
    -------------------------------------------------------------------------------------´
    | Camshaft Sprocket Bolts | 14-18 | 10-13 |
    -------------------------------------------------------------------------------------´
    | Camshaft Caps | 16-22 | 12-16 |
    -------------------------------------------------------------------------------------´
    | Chain Tensioner Retaining Bolts | 15-19 | 11-14 |
    -------------------------------------------------------------------------------------´
    | Timing Belt Rear Cover Bolts | 8.8 | 70 (Lb-In) |
    -------------------------------------------------------------------------------------´
    | Camshaft Pulley Bolts | 21-25 | 15-18 |
    -------------------------------------------------------------------------------------´
    | Ignition Coil Pack Screws | 4.5-7 | 3.3-5.2 |
    -------------------------------------------------------------------------------------´
    | Ignition Coil Pack Bracket Bolts | 28-42 | 21-31 |
    -------------------------------------------------------------------------------------´
    | Fuel Rail Retaining Bolts | 15-23 | 11-16 |
    -------------------------------------------------------------------------------------´
    | Spark Plugs | 22-27 | 17-19 |
    -------------------------------------------------------------------------------------´
    | Engine Lifting Eye Bolts | 15-23 | 11-16 |
    -------------------------------------------------------------------------------------´
    | Alternator Retaining Bolts | 34-50 | 25-36 |
    -------------------------------------------------------------------------------------´
    | EGR Tube to Exhaust Manifold | 15-23 | 11-16 |
    -------------------------------------------------------------------------------------´
    | HEGO Sensor | 37-45 | 27-33 |
    -------------------------------------------------------------------------------------´
    | Crankshaft Sensor Retaining Bolts | 1.5-2.5 | 13-22 (Lb-In) |
    -------------------------------------------------------------------------------------´
    | Camshaft Bearing Caps | (5) | (5) |
    -------------------------------------------------------------------------------------´
    | Oil Screen Bolts | 7-11 | 6-8 |
    -------------------------------------------------------------------------------------´

    (1) Tighten in two steps: 49-69 N-m (37-50 Lb-Ft) 83-93 N-m (62-68 Lb-Ft)

    (2) Tighten in two steps: 46-69 N-m (34-50 Lb-Ft) 78-88 N-m (58-65 Lb-Ft)

    (3) Tighten in two steps: 39-50 N-m (29-43 Lb-Ft) 69-78 N-m (51-58 Lb-Ft)

    (4) Tighten in two steps: 30-35 N-m (22-26 Lb-Ft) 45-50 N-m (33-36 Lb-Ft)

    (5) Tighten in two steps: 8-12 N-m (71-106 Lb-In) 16-22 N-m (12-16 Lb-Ft)
     
    Last edited: Mar 13, 2008
  2. Bizzy

    Bizzy Moderator Staff Member

    Joined:
    May 1, 2001
    Messages:
    13,218
    Likes Received:
    1,444
    Awesome Tom! :thumb:
     
    Ricardo likes this.
  3. 93rev2sev

    93rev2sev SHO Member

    Joined:
    Nov 1, 2004
    Messages:
    6,459
    Likes Received:
    1,821
    Occupation:
    Network Eng.
    Location:
    Hockeytown
    Well, I take no credit...Like I said...just copied it from a copy that someone copied out of a copy of a service manual... :biggrin:
     
    Bizzy likes this.
  4. Tecchie

    Tecchie SHO Member

    Joined:
    Jun 3, 2008
    Messages:
    147
    Likes Received:
    10
    Occupation:
    Janitor (In doors baby, YEAH!)
    Location:
    Marysville, Washington
    There is no specification for the main bearing caps? It just says (2) - (2)...


    What does that mean?:swing:

    Oh, and Cylinder HEad Bolts and connecting rods???
     
    Last edited: Jun 24, 2009
  5. NCTaurusSHO

    NCTaurusSHO SHO Member

    Joined:
    Jul 8, 2005
    Messages:
    1,243
    Likes Received:
    57
    Location:
    Elizabeth City, NC
    Because it came from a shop manual,and the numbers refer to special sequences for tourqueing the nuts and bolts at the bottom of the page.

    Mains step 1 34-50 ft. lbs
    step 2 58-65 ft. lbs

    Rods step 1 22-26 ft.lbs
    step 2 33-36 ft.lbs

    Cylinder head bolts Step 1 37-50 ft.lbs
    step 2 62-68 ft.lbs
     
    1995SHO9 likes this.

Share This Page

If you wish to help keep SHOforum running, please click the donation button below